[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [linrad] Radeon Video Card / svgalib information
- Subject: Re: [linrad] Radeon Video Card / svgalib information
- From:jr1ede@xxxxxxxxxxxxxxxx>
- Date: Sat, 18 Jan 2003 23:36:02 +0900
Hello Roger,
This seems to apply same to Matrox Millennium G400 driver too.
I will try this tomorrow and see what happens on switching console problem.
I understood that you hadn't have any problem at your beginning on your Radeon.
Thanks for the good information.
Kohjin - JR1EDE
At 09:12 03/01/18 -0500, you wrote:
>Hello, Conrad and all!
>
>I am doing some housekeeping and came across my information on the ATI
>Radeon 32 MB DDR 4X AGP video card that I use here. Conrad had trouble
>getting his Radeon card to work with svgalib-1.4.3 and subsequently went
>to the newer version of svgalib, I believe 1.9.17. I have a minor
>glitch with the Radeon here, and so decided I'd upgrade to the newer
>version of svgalib. However, I couldn't get any of the newer versions
>of svgalib to compile here, and ultimately went back to 1.4.3. In the
>process of reinstalling svgalib 1.4.3 from scratch I of course
>rediscovered what I had to do to get the video card working here with
>svgalib.
>
>Here it is:
>
>To get the Radeon video card to work with svgalib 1.4.3 you need to go to:
>
>http://www.arava.co.il/matan/svgalib/
>
>and under '1.4.3' near the bottom of the page go to the link where is
>says "Please use this driver, r128.c, instead of the one in the
>distribution". The link goes to:
>
>http://www.arava.co.il/matan/svgalib/r128.c which is the file that you
>need to download.
>
>but you don't need to know that if you go to the page above and use the
>link on that page..
>
>Once you have downloaded the file r128.c, you must go to the directory
>where you have the source code for svgalib (here it is
>/usr/local/src/svgalib-1.4.3/src) and replace the r.128 file already
>there with the r.128 you got from the above site. Then you must compile
>it. When I do this the Radeon works. When I don't use the new r.128,
>it does not.
>
>Hope that helps, and
>
>73,
>
>--
>Roger Rehr
>W3SZ
>2 Merrymount Road
>Reading, PA 19609
>http://www.qsl.net/w3sz
LINRADDARNIL