[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Radeon Video Card / svgalib information
- Subject: Radeon Video Card / svgalib information
- From:w3sz@xxxxxxxxxxxxxxxx>
- Date: Sat, 18 Jan 2003 09:12:51 -0500
Hello, Conrad and all!
I am doing some housekeeping and came across my information on the ATI
Radeon 32 MB DDR 4X AGP video card that I use here. Conrad had trouble
getting his Radeon card to work with svgalib-1.4.3 and subsequently went
to the newer version of svgalib, I believe 1.9.17. I have a minor
glitch with the Radeon here, and so decided I'd upgrade to the newer
version of svgalib. However, I couldn't get any of the newer versions
of svgalib to compile here, and ultimately went back to 1.4.3. In the
process of reinstalling svgalib 1.4.3 from scratch I of course
rediscovered what I had to do to get the video card working here with
svgalib.
Here it is:
To get the Radeon video card to work with svgalib 1.4.3 you need to go to:
http://www.arava.co.il/matan/svgalib/
and under '1.4.3' near the bottom of the page go to the link where is
says "Please use this driver, r128.c, instead of the one in the
distribution". The link goes to:
http://www.arava.co.il/matan/svgalib/r128.c which is the file that you
need to download.
but you don't need to know that if you go to the page above and use the
link on that page..
Once you have downloaded the file r128.c, you must go to the directory
where you have the source code for svgalib (here it is
/usr/local/src/svgalib-1.4.3/src) and replace the r.128 file already
there with the r.128 you got from the above site. Then you must compile
it. When I do this the Radeon works. When I don't use the new r.128,
it does not.
Hope that helps, and
73,
--
Roger Rehr
W3SZ
2 Merrymount Road
Reading, PA 19609
http://www.qsl.net/w3sz
LINRADDARNIL