[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Re:[linrad] Getting started
- Subject: Re: Re:[linrad] Getting started
- From: Richard Bown <richard.bown@xxxxxxxxxxxxxxxxxxxx
- Date: 19 Oct 2003 08:34:52 +0100
Hi
on the verge of giving up with this
On Thu, 2003-10-16 at 18:54, Richard Bown wrote:
> Here is the strace of linrad run as root,
> still dos'nt run :(
>
> and /proc/bus/pci is there !
> [root@xxxxx linrad-01.07]# ls /proc/bus/pci
> 00/ 01/ devices
>
but there is no 15/ directory, nor is there on any of my other
machines.
Maybe my friend who I'm trying to port him over to linux was right in
his attitude towards linux and ham apps.
I'll be very disappointed if he is.
All we need is a visual dsp audio spectrum analysis prog, for getting
very weak microwave sigs out of the noise, perhaps someone could kindly
point me on the direction of one that preferably will run in linux or
successfully run in a virtual machine.
>
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/0c.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/0d.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/0e.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/0f.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/10.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/11.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/12.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/13.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/14.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/15.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/16.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/17.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/18.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/19.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/1a.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/1b.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/1c.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/1d.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/1e.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/15/1f.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/00.0", O_RDONLY) = 5
> read(5, "\6\21\5\3\6\0\20\"\3\0\0\6", 12) = 12
> close(5) = 0
> open("/proc/bus/pci/00/01.0", O_RDONLY) = 5
> read(5, "\6\21\5\203\7\0000\"\0\0\4\6", 12) = 12
> close(5) = 0
> open("/proc/bus/pci/00/02.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/03.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/04.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/05.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/06.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/07.0", O_RDONLY) = 5
> read(5, "\6\21\206\6\207\0\20\2@xxxxxxxxxxxxx 12) = 12
> close(5) = 0
> open("/proc/bus/pci/00/08.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/09.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/0a.0", O_RDONLY) = 5
> read(5, "\354\0209\201\7\0\200\2\20\0\0\2", 12) = 12
> close(5) = 0
> open("/proc/bus/pci/00/0b.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/0c.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/0d.0", O_RDONLY) = 5
> read(5, "\1\21\0\224\7\0\0\2\1\0\0\1", 12) = 12
> close(5) = 0
> open("/proc/bus/pci/00/0e.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/0f.0", O_RDONLY) = 5
> read(5, "P\20@xxxxxxxxxxxxxxxxxxxxxxxxxxx 12) = 12
> close(5) = 0
> open("/proc/bus/pci/00/10.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/11.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/12.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/13.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/14.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/15.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/16.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/17.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/18.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/19.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/1a.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/1b.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/1c.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/1d.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/1e.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/1f.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/01/00.0", O_RDONLY) = 5
> read(5, "\2\20YQ\207\0\260\2\0\0\0\3", 12) = 12
> close(5) = 0
> open("/proc/bus/pci/01/00.0", O_RDONLY) = 5
> read(5, "\2\20YQ\207\0\260\2\0\0\0\3\10@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> 256) = 256
> close(5) = 0
> open("/proc/bus/pci/00/00.0", O_RDONLY) = 5
> read(5, "\6\21\5\3\6\0\20\"\3\0\0\6", 12) = 12
> close(5) = 0
> open("/proc/bus/pci/00/01.0", O_RDONLY) = 5
> read(5, "\6\21\5\203\7\0000\"\0\0\4\6", 12) = 12
> close(5) = 0
> open("/proc/bus/pci/00/02.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/03.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/04.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/05.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/06.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/07.0", O_RDONLY) = 5
> read(5, "\6\21\206\6\207\0\20\2@xxxxxxxxxxxxx 12) = 12
> close(5) = 0
> open("/proc/bus/pci/00/08.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/09.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/0a.0", O_RDONLY) = 5
> read(5, "\354\0209\201\7\0\200\2\20\0\0\2", 12) = 12
> close(5) = 0
> open("/proc/bus/pci/00/0b.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/0c.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/0d.0", O_RDONLY) = 5
> read(5, "\1\21\0\224\7\0\0\2\1\0\0\1", 12) = 12
> close(5) = 0
> open("/proc/bus/pci/00/0e.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/0f.0", O_RDONLY) = 5
> read(5, "P\20@xxxxxxxxxxxxxxxxxxxxxxxxxxx 12) = 12
> close(5) = 0
> open("/proc/bus/pci/00/10.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/11.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/12.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/13.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/14.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/15.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/16.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/17.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/18.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/19.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/1a.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/1b.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/1c.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/1d.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/1e.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/00/1f.0", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
> close(-1) = -1 EBADF (Bad file descriptor)
> open("/proc/bus/pci/01/00.0", O_RDONLY) = 5
> read(5, "\2\20YQ\207\0\260\2\0\0\0\3", 12) = 12
> close(5) = 0
> open("/proc/bus/pci/01/00.0", O_RDONLY) = 5
> read(5, "\2\20YQ\207\0\260\2\0\0\0\3\10@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> 256) = 256
> close(5) = 0
> mmap2(NULL, 16384, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xdfef0) =
> 0x40015000
> mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xc0) =
> 0x401e6000
> munmap(0x40015000, 16384) = 0
> munmap(0x401e6000, 65536) = 0
> write(1, "Using Rage 128 driver, 65536KB.\n", 32) = 32
> write(1, "svgalib 1.4.3\n", 14) = 14
> mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xa0) =
> 0x40015000
> mmap2(NULL, 67108864, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xd0000) =
> 0x401e6000mmap2(NULL, 16384, PROT_READ|PROT_WRITE, MAP_SHARED, 3,
> 0xdfef0) = 0x441e6000
> mmap2(NULL, 32768, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xb8) =
> 0x441ea000
> close(3) = 0
> open("/etc/vga/libvga.config", O_RDONLY) = 3
> fstat64(3, {st_mode=S_IFREG|0644, st_size=16284, ...}) = 0
> fstat64(3, {st_mode=S_IFREG|0644, st_size=16284, ...}) = 0
> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
> 0) = 0x441f2000
> read(3, "# Configuration file for svgalib"..., 12288) = 12288
> read(3, "order to use them:\n# 1280x720, 1"..., 4096) = 3996
> close(3) = 0
> munmap(0x441f2000, 4096) = 0
> open("/root/.svgalibrc", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> fcntl64(0, F_GETFD) = 0
> fcntl64(1, F_GETFD) = 0
> fcntl64(2, F_GETFD) = 0
> open("/dev/mouse", O_RDWR|O_NONBLOCK) = 3
> rt_sigaction(SIGINT, {0x4004d410, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) =
> 0
> getuid32() = 0
> setuid32(0) = 0
> getgid32() = 0
> setgid32(0) = 0
> getuid32() = 0
> setresuid32(0xffffffff, 0, 0xffffffff) = 0
> getgid32() = 0
> setregid32(0xffffffff, 0) = 0
> open("/proc/cpuinfo", O_RDONLY) = 5
> fstat64(5, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
> mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
> 0) = 0x441f2000
> read(5, "processor\t: 0\nvendor_id\t: Authen"..., 8192) = 401
> close(5) = 0
> munmap(0x441f2000, 8192) = 0
> ioperm(0x378, 0x4, 0x1) = 0
> sync() = 0
> open("par_userint", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> write(1, "\n", 1) = 1
> write(1, "SIMD (=xmm) supported by hardwar"..., 34) = 34
> write(1, "/proc/cpuinfo says LINUX core is"..., 50) = 50
> write(1, "Linrad will allow you to select "..., 61) = 61
> write(1, "on your system.\n", 16) = 16
> write(1, "Any illegal instruction will cau"..., 54) = 54
> write(1, "If your core is 2.4.8 or above e"..., 58) = 58
> write(1, "Seems just the xmm flag in /proc"..., 53) = 53
> write(1, "To use fast routines with an old"..., 83) = 83
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "Setup file par_userint missing.\n", 32) = 32
> write(1, "Use W to create a new par_userin"..., 53) = 53
> write(1, "Press S for setup routines\n", 27) = 27
> write(1, "Any other key to exit\nThen press"..., 40) = 40
> fstat64(0, {st_mode=S_IFCHR|0600, st_rdev=makedev(4, 8), ...}) = 0
> ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost isig icanon echo ...}) = 0
> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
> 0) = 0x441f2000
> write(1, "=>", 2) = 2
> read(0, "s\n", 1024) = 2
> getpid() = 4649
> ioctl(4, 0x5607, 0x8) = 0
> ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost isig icanon echo ...}) = 0
> ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost isig icanon echo ...}) = 0
> ioctl(0, SNDCTL_TMR_STOP, {B38400 opost -isig icanon echo ...}) = 0
> ioctl(4, 0x4b3a, 0x1) = 0
> ioctl(4, 0x5601, 0x4008f0e0) = 0
> rt_sigaction(SIGPROF, {0x4003f7d0, [], SA_RESTORER|SA_RESTART,
> 0x400da3b8}, NULL, 8) = 0
> rt_sigaction(SIGSYS, {0x40044ab0, [], SA_RESTORER|SA_RESTART,
> 0x400da3b8}, NULL, 8) = 0
> ioctl(4, 0x5602, 0xbffff368) = 0
> fcntl64(0, F_GETFD) = 0
> fcntl64(1, F_GETFD) = 0
> fcntl64(2, F_GETFD) = 0
> mmap2(NULL, 135168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
> 0) = 0x441f3000
> brk(0) = 0x80c0000
> brk(0x80d0000) = 0x80d0000
> rt_sigaction(SIGHUP, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) =
> 0
> rt_sigaction(SIGINT, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {0x4004d410, [], SA_RESTORER, 0x400da3b8}, 8) = 0
> rt_sigaction(SIGQUIT, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_IGN}, 8) = 0
> rt_sigaction(SIGILL, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) =
> 0
> rt_sigaction(SIGTRAP, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) = 0
> rt_sigaction(SIGABRT, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) = 0
> rt_sigaction(SIGBUS, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) =
> 0
> rt_sigaction(SIGFPE, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) =
> 0
> rt_sigaction(SIGSEGV, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) = 0
> rt_sigaction(SIGPIPE, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) = 0
> rt_sigaction(SIGALRM, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) = 0
> rt_sigaction(SIGTERM, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) = 0
> rt_sigaction(SIGXCPU, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) = 0
> rt_sigaction(SIGXFSZ, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) = 0
> rt_sigaction(SIGVTALRM, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) = 0
> rt_sigaction(SIGPWR, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
> {SIG_DFL}, 8) =
> 0
> ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost -isig icanon echo ...}) = 0
> ioctl(0, SNDCTL_TMR_STOP, {B38400 opost -isig icanon echo ...}) = 0
> ioctl(4, 0x4b3a, 0) = 0
> nanosleep({0, 150000000}, NULL) = 0
> ioctl(0, SNDCTL_TMR_STOP, {B38400 opost isig icanon echo ...}) = 0
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "Choose one of the following vide"..., 42) = 42
> write(1, " 5: 320x200 6: 320x2"..., 61) = 61
> write(1, " 8: 360x480 10: 640x4"..., 61) = 61
> brk(0) = 0x80d0000
> brk(0x80d1000) = 0x80d1000
> write(1, " 12: 1024x768 50: 320x2"..., 61) = 61
> write(1, " 65: 960x720 75: 320x4"..., 61) = 61
> write(1, " 85: 320x480 90: 720x5"..., 61) = 61
> brk(0) = 0x80d1000
> brk(0x80d2000) = 0x80d2000
> write(1, " 140: 400x600 \n", 21) = 21
> write(1, "Enter mode number: ", 19) = 19
> read(0, "11\n", 1024) = 3
> write(1, "\n", 1) = 1
> write(1, "Enter font scale (1 to 3): ", 27) = 27
> read(0, "1\n", 1024) = 2
> write(1, "\n", 1) = 1
> ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost isig icanon echo ...}) = 0
> ioctl(0, SNDCTL_TMR_STOP, {B38400 opost -isig icanon echo ...}) = 0
> ioctl(4, 0x4b3a, 0) = 0
> nanosleep({0, 150000000}, NULL) = 0
> ioctl(0, SNDCTL_TMR_STOP, {B38400 opost isig icanon echo ...}) = 0
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "\n", 1) = 1
> write(1, "svgalib reports your mouse is ty"..., 38) = 38
> write(1, "Edit /etc/vga/libvga.config if w"..., 69) = 69
> write(1, "\n", 1) = 1
> write(1, "Enter mouse speed reduction fact"..., 35) = 35
> read(0, "1\n", 1024) = 2
> ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost isig icanon echo ...}) = 0
> ioctl(0, SNDCTL_TMR_STOP, {B38400 opost -isig icanon echo ...}) = 0
> ioctl(4, 0x4b3a, 0x1) = 0
> nanosleep({0, 150000000}, NULL) = 0
> ioctl(0, SNDCTL_TMR_STOP, {B38400 opost isig -icanon -echo ...}) = 0
> brk(0) = 0x80d2000
> brk(0x80d8000) = 0x80d8000
> open("/home/emedir/own_info", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> sync() = 0
> nanosleep({0, 30000000}, NULL) = 0
> select(1, [0], NULL, NULL, {0, 0}) = 0 (Timeout)
> read(4, 0xbffff61f, 1) = ? ERESTARTSYS (To be
> restarted)
> --- SIGPROF (Profiling timer expired) @ 0 (0) ---
> mmap2(NULL, 483328, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
> 0) = 0x44214000
> ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost isig -icanon -echo ...}) = 0
> ioctl(0, SNDCTL_TMR_STOP, {B38400 opost -isig -icanon -echo ...}) = 0
> ioctl(4, 0x4b3a, 0) = 0
> nanosleep({0, 150000000}, NULL) = 0
> ioctl(4, 0x5605, 0x1) = 0
> ioctl(4, 0x5607 <unfinished ...>
> [root@xxxxx linrad-01.07]#
> >
> > and why is it complaining of my linux core being uncompatable from
> > /porc/cpuinfo ???
> >
> > whats wrong with this ?
> > processor : 0
> > vendor_id : AuthenticAMD
> > cpu family : 6
> > model : 7
> > model name : AMD Duron(tm)
> > stepping : 1
> > cpu MHz : 1200.095
> > cache size : 64 KB
> > fdiv_bug : no
> > hlt_bug : no
> > f00f_bug : no
> > coma_bug : no
> > fpu : yes
> > fpu_exception : yes
> > cpuid level : 1
> > wp : yes
> > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> > mca cmov
> > pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
> > bogomips : 2392.06
> >
> >
> > At least if I run in a console it will respond to ctrl C
> >
> > It all goes nuts after on setup you enter the mouse speed.
> >
> > I real confused with this
> >
> > > > 73 mvh
> > > > Richard G8JVM
> > > > --
> > > > Richard Bown <richard.bown@xxxxxxxxxxxxxxxx>
> > > >
> > > >
--
Richard Bown <richard.bown@xxxxxxxxxxxxxxxx>
LINRADDARNIL