[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Re:[linrad] Getting started
- Subject: Re: Re:[linrad] Getting started
- From: Richard Bown <richard.bown@xxxxxxxxxxxxxxxxxxxx
- Date: 16 Oct 2003 18:54:26 +0100
Here is the strace of linrad run as root,
still dos'nt run :(
and /proc/bus/pci is there !
[root@xxxxx linrad-01.07]# ls /proc/bus/pci
00/ 01/ devices
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/0c.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/0d.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/0e.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/0f.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/10.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/11.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/12.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/13.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/14.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/15.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/16.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/17.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/18.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/19.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/1a.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/1b.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/1c.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/1d.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/1e.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/15/1f.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/00.0", O_RDONLY) = 5
read(5, "\6\21\5\3\6\0\20\"\3\0\0\6", 12) = 12
close(5) = 0
open("/proc/bus/pci/00/01.0", O_RDONLY) = 5
read(5, "\6\21\5\203\7\0000\"\0\0\4\6", 12) = 12
close(5) = 0
open("/proc/bus/pci/00/02.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/03.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/04.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/05.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/06.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/07.0", O_RDONLY) = 5
read(5, "\6\21\206\6\207\0\20\2@xxxxxxxxxxxxx 12) = 12
close(5) = 0
open("/proc/bus/pci/00/08.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/09.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/0a.0", O_RDONLY) = 5
read(5, "\354\0209\201\7\0\200\2\20\0\0\2", 12) = 12
close(5) = 0
open("/proc/bus/pci/00/0b.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/0c.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/0d.0", O_RDONLY) = 5
read(5, "\1\21\0\224\7\0\0\2\1\0\0\1", 12) = 12
close(5) = 0
open("/proc/bus/pci/00/0e.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/0f.0", O_RDONLY) = 5
read(5, "P\20@xxxxxxxxxxxxxxxxxxxxxxxxxxx 12) = 12
close(5) = 0
open("/proc/bus/pci/00/10.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/11.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/12.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/13.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/14.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/15.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/16.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/17.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/18.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/19.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/1a.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/1b.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/1c.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/1d.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/1e.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/1f.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff380, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/01/00.0", O_RDONLY) = 5
read(5, "\2\20YQ\207\0\260\2\0\0\0\3", 12) = 12
close(5) = 0
open("/proc/bus/pci/01/00.0", O_RDONLY) = 5
read(5, "\2\20YQ\207\0\260\2\0\0\0\3\10@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
256) = 256
close(5) = 0
open("/proc/bus/pci/00/00.0", O_RDONLY) = 5
read(5, "\6\21\5\3\6\0\20\"\3\0\0\6", 12) = 12
close(5) = 0
open("/proc/bus/pci/00/01.0", O_RDONLY) = 5
read(5, "\6\21\5\203\7\0000\"\0\0\4\6", 12) = 12
close(5) = 0
open("/proc/bus/pci/00/02.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/03.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/04.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/05.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/06.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/07.0", O_RDONLY) = 5
read(5, "\6\21\206\6\207\0\20\2@xxxxxxxxxxxxx 12) = 12
close(5) = 0
open("/proc/bus/pci/00/08.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/09.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/0a.0", O_RDONLY) = 5
read(5, "\354\0209\201\7\0\200\2\20\0\0\2", 12) = 12
close(5) = 0
open("/proc/bus/pci/00/0b.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/0c.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/0d.0", O_RDONLY) = 5
read(5, "\1\21\0\224\7\0\0\2\1\0\0\1", 12) = 12
close(5) = 0
open("/proc/bus/pci/00/0e.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/0f.0", O_RDONLY) = 5
read(5, "P\20@xxxxxxxxxxxxxxxxxxxxxxxxxxx 12) = 12
close(5) = 0
open("/proc/bus/pci/00/10.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/11.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/12.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/13.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/14.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/15.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/16.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/17.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/18.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/19.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/1a.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/1b.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/1c.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/1d.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/1e.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/00/1f.0", O_RDONLY) = -1 ENOENT (No such file or
directory)
read(-1, 0xbffff250, 12) = -1 EBADF (Bad file descriptor)
close(-1) = -1 EBADF (Bad file descriptor)
open("/proc/bus/pci/01/00.0", O_RDONLY) = 5
read(5, "\2\20YQ\207\0\260\2\0\0\0\3", 12) = 12
close(5) = 0
open("/proc/bus/pci/01/00.0", O_RDONLY) = 5
read(5, "\2\20YQ\207\0\260\2\0\0\0\3\10@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
256) = 256
close(5) = 0
mmap2(NULL, 16384, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xdfef0) =
0x40015000
mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xc0) =
0x401e6000
munmap(0x40015000, 16384) = 0
munmap(0x401e6000, 65536) = 0
write(1, "Using Rage 128 driver, 65536KB.\n", 32) = 32
write(1, "svgalib 1.4.3\n", 14) = 14
mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xa0) =
0x40015000
mmap2(NULL, 67108864, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xd0000) =
0x401e6000mmap2(NULL, 16384, PROT_READ|PROT_WRITE, MAP_SHARED, 3,
0xdfef0) = 0x441e6000
mmap2(NULL, 32768, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xb8) =
0x441ea000
close(3) = 0
open("/etc/vga/libvga.config", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=16284, ...}) = 0
fstat64(3, {st_mode=S_IFREG|0644, st_size=16284, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x441f2000
read(3, "# Configuration file for svgalib"..., 12288) = 12288
read(3, "order to use them:\n# 1280x720, 1"..., 4096) = 3996
close(3) = 0
munmap(0x441f2000, 4096) = 0
open("/root/.svgalibrc", O_RDONLY) = -1 ENOENT (No such file or
directory)
fcntl64(0, F_GETFD) = 0
fcntl64(1, F_GETFD) = 0
fcntl64(2, F_GETFD) = 0
open("/dev/mouse", O_RDWR|O_NONBLOCK) = 3
rt_sigaction(SIGINT, {0x4004d410, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) =
0
getuid32() = 0
setuid32(0) = 0
getgid32() = 0
setgid32(0) = 0
getuid32() = 0
setresuid32(0xffffffff, 0, 0xffffffff) = 0
getgid32() = 0
setregid32(0xffffffff, 0) = 0
open("/proc/cpuinfo", O_RDONLY) = 5
fstat64(5, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x441f2000
read(5, "processor\t: 0\nvendor_id\t: Authen"..., 8192) = 401
close(5) = 0
munmap(0x441f2000, 8192) = 0
ioperm(0x378, 0x4, 0x1) = 0
sync() = 0
open("par_userint", O_RDONLY) = -1 ENOENT (No such file or
directory)
write(1, "\n", 1) = 1
write(1, "SIMD (=xmm) supported by hardwar"..., 34) = 34
write(1, "/proc/cpuinfo says LINUX core is"..., 50) = 50
write(1, "Linrad will allow you to select "..., 61) = 61
write(1, "on your system.\n", 16) = 16
write(1, "Any illegal instruction will cau"..., 54) = 54
write(1, "If your core is 2.4.8 or above e"..., 58) = 58
write(1, "Seems just the xmm flag in /proc"..., 53) = 53
write(1, "To use fast routines with an old"..., 83) = 83
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "Setup file par_userint missing.\n", 32) = 32
write(1, "Use W to create a new par_userin"..., 53) = 53
write(1, "Press S for setup routines\n", 27) = 27
write(1, "Any other key to exit\nThen press"..., 40) = 40
fstat64(0, {st_mode=S_IFCHR|0600, st_rdev=makedev(4, 8), ...}) = 0
ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost isig icanon echo ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x441f2000
write(1, "=>", 2) = 2
read(0, "s\n", 1024) = 2
getpid() = 4649
ioctl(4, 0x5607, 0x8) = 0
ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost isig icanon echo ...}) = 0
ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost isig icanon echo ...}) = 0
ioctl(0, SNDCTL_TMR_STOP, {B38400 opost -isig icanon echo ...}) = 0
ioctl(4, 0x4b3a, 0x1) = 0
ioctl(4, 0x5601, 0x4008f0e0) = 0
rt_sigaction(SIGPROF, {0x4003f7d0, [], SA_RESTORER|SA_RESTART,
0x400da3b8}, NULL, 8) = 0
rt_sigaction(SIGSYS, {0x40044ab0, [], SA_RESTORER|SA_RESTART,
0x400da3b8}, NULL, 8) = 0
ioctl(4, 0x5602, 0xbffff368) = 0
fcntl64(0, F_GETFD) = 0
fcntl64(1, F_GETFD) = 0
fcntl64(2, F_GETFD) = 0
mmap2(NULL, 135168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x441f3000
brk(0) = 0x80c0000
brk(0x80d0000) = 0x80d0000
rt_sigaction(SIGHUP, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) =
0
rt_sigaction(SIGINT, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{0x4004d410, [], SA_RESTORER, 0x400da3b8}, 8) = 0
rt_sigaction(SIGQUIT, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_IGN}, 8) = 0
rt_sigaction(SIGILL, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) =
0
rt_sigaction(SIGTRAP, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) = 0
rt_sigaction(SIGABRT, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) = 0
rt_sigaction(SIGBUS, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) =
0
rt_sigaction(SIGFPE, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) =
0
rt_sigaction(SIGSEGV, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) = 0
rt_sigaction(SIGPIPE, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) = 0
rt_sigaction(SIGALRM, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) = 0
rt_sigaction(SIGTERM, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) = 0
rt_sigaction(SIGXCPU, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) = 0
rt_sigaction(SIGXFSZ, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) = 0
rt_sigaction(SIGVTALRM, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) = 0
rt_sigaction(SIGPWR, {0x4003f3d0, [], SA_RESTORER, 0x400da3b8},
{SIG_DFL}, 8) =
0
ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost -isig icanon echo ...}) = 0
ioctl(0, SNDCTL_TMR_STOP, {B38400 opost -isig icanon echo ...}) = 0
ioctl(4, 0x4b3a, 0) = 0
nanosleep({0, 150000000}, NULL) = 0
ioctl(0, SNDCTL_TMR_STOP, {B38400 opost isig icanon echo ...}) = 0
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "Choose one of the following vide"..., 42) = 42
write(1, " 5: 320x200 6: 320x2"..., 61) = 61
write(1, " 8: 360x480 10: 640x4"..., 61) = 61
brk(0) = 0x80d0000
brk(0x80d1000) = 0x80d1000
write(1, " 12: 1024x768 50: 320x2"..., 61) = 61
write(1, " 65: 960x720 75: 320x4"..., 61) = 61
write(1, " 85: 320x480 90: 720x5"..., 61) = 61
brk(0) = 0x80d1000
brk(0x80d2000) = 0x80d2000
write(1, " 140: 400x600 \n", 21) = 21
write(1, "Enter mode number: ", 19) = 19
read(0, "11\n", 1024) = 3
write(1, "\n", 1) = 1
write(1, "Enter font scale (1 to 3): ", 27) = 27
read(0, "1\n", 1024) = 2
write(1, "\n", 1) = 1
ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost isig icanon echo ...}) = 0
ioctl(0, SNDCTL_TMR_STOP, {B38400 opost -isig icanon echo ...}) = 0
ioctl(4, 0x4b3a, 0) = 0
nanosleep({0, 150000000}, NULL) = 0
ioctl(0, SNDCTL_TMR_STOP, {B38400 opost isig icanon echo ...}) = 0
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "\n", 1) = 1
write(1, "svgalib reports your mouse is ty"..., 38) = 38
write(1, "Edit /etc/vga/libvga.config if w"..., 69) = 69
write(1, "\n", 1) = 1
write(1, "Enter mouse speed reduction fact"..., 35) = 35
read(0, "1\n", 1024) = 2
ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost isig icanon echo ...}) = 0
ioctl(0, SNDCTL_TMR_STOP, {B38400 opost -isig icanon echo ...}) = 0
ioctl(4, 0x4b3a, 0x1) = 0
nanosleep({0, 150000000}, NULL) = 0
ioctl(0, SNDCTL_TMR_STOP, {B38400 opost isig -icanon -echo ...}) = 0
brk(0) = 0x80d2000
brk(0x80d8000) = 0x80d8000
open("/home/emedir/own_info", O_RDONLY) = -1 ENOENT (No such file or
directory)
sync() = 0
nanosleep({0, 30000000}, NULL) = 0
select(1, [0], NULL, NULL, {0, 0}) = 0 (Timeout)
read(4, 0xbffff61f, 1) = ? ERESTARTSYS (To be
restarted)
--- SIGPROF (Profiling timer expired) @ 0 (0) ---
mmap2(NULL, 483328, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x44214000
ioctl(0, SNDCTL_TMR_TIMEBASE, {B38400 opost isig -icanon -echo ...}) = 0
ioctl(0, SNDCTL_TMR_STOP, {B38400 opost -isig -icanon -echo ...}) = 0
ioctl(4, 0x4b3a, 0) = 0
nanosleep({0, 150000000}, NULL) = 0
ioctl(4, 0x5605, 0x1) = 0
ioctl(4, 0x5607 <unfinished ...>
[root@xxxxx linrad-01.07]#
On Thu, 2003-10-16 at 14:55, Richard Bown wrote:
> Thanks for the reply Sergio, I was wondering if this was one of those
> lists, that stayed very quiet.
>
> This behaviour is very strange.
> This is an AMD 1.2 GHz Duron processor.
> I noticed from the archives that at least 1 person is running with MDK
> 9.1, shortly to try on MDK 9.2, still downloading the new release.
> Some observations I made :-
> the was no rules to "make install" so the binary stayed in the directory
> it was built, so there 's no path to it.
> I also tried running it from outside of X , and it still turns off the
> output from the graphics card.
>
> and why is it complaining of my linux core being uncompatable from
> /porc/cpuinfo ???
>
> whats wrong with this ?
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 6
> model : 7
> model name : AMD Duron(tm)
> stepping : 1
> cpu MHz : 1200.095
> cache size : 64 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov
> pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
> bogomips : 2392.06
>
>
> At least if I run in a console it will respond to ctrl C
>
> It all goes nuts after on setup you enter the mouse speed.
>
> I real confused with this
>
> For anyone who can make sense of a trace on start up, see below:-
> [richard@xxxxx linrad-01.07]$ strace linrad
> execve("/home/richard/linrad-01.07/linrad", ["linrad"], [/* 55 vars */])
> = 0
> uname({sys="Linux", node="gb7tf.org.uk", ...}) = 0
> brk(0) = 0x80bed20
> old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
> -1, 0) = 0
> x40013000
> open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or
> directory)
> open("/etc/ld.so.cache", O_RDONLY) = 3
> fstat64(3, {st_mode=S_IFREG|0644, st_size=67644, ...}) = 0
> old_mmap(NULL, 67644, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40014000
> close(3) = 0
> open("/usr/lib/libvgagl.so.1", O_RDONLY) = 3
> read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 +\0\000"...,
> 1024) = 10
> 24
> fstat64(3, {st_mode=S_IFREG|0755, st_size=65240, ...}) = 0
> old_mmap(NULL, 68352, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
> 0x40025000
> mprotect(0x40034000, 6912, PROT_NONE) = 0
> old_mmap(0x40034000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED,
> 3, 0xe00
> 0) = 0x40034000
> close(3) = 0
> open("/usr/lib/libvga.so.1", O_RDONLY) = 3
> read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\210"...,
> 1024) = 10
> 24
> fstat64(3, {st_mode=S_IFREG|0755, st_size=342156, ...}) = 0
> old_mmap(NULL, 365980, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
> 0x40036000
> mprotect(0x40085000, 42396, PROT_NONE) = 0
> old_mmap(0x40085000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED,
> 3, 0x4e
> 000) = 0x40085000
> old_mmap(0x4008b000, 17820, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_ANON
> YMOUS, -1, 0) = 0x4008b000
> close(3) = 0
> open("/lib/i686/libm.so.6", O_RDONLY) = 3
> read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\2404\0"...,
> 1024) = 102
> 4
> fstat64(3, {st_mode=S_IFREG|0755, st_size=136052, ...}) = 0
> old_mmap(NULL, 138624, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
> 0x40090000
> mprotect(0x400b1000, 3456, PROT_NONE) = 0
> old_mmap(0x400b1000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED,
> 3, 0x200
> 00) = 0x400b1000
> close(3) = 0
> open("/lib/i686/libc.so.6", O_RDONLY) = 3
> read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260X\1"...,
> 1024) = 102
> 4
> fstat64(3, {st_mode=S_IFREG|0755, st_size=1246468, ...}) = 0
> old_mmap(NULL, 1256516, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
> 0x400b2000
> mprotect(0x401df000, 23620, PROT_NONE) = 0
> old_mmap(0x401df000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED,
> 3, 0x12
> c000) = 0x401df000
> old_mmap(0x401e3000, 7236, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_ANONY
> MOUS, -1, 0) = 0x401e3000
> close(3) = 0
> old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
> -1, 0) = 0
> x401e5000
> mprotect(0x40036000, 323584, PROT_READ|PROT_WRITE) = 0
> mprotect(0x40036000, 323584, PROT_READ|PROT_EXEC) = 0
> munmap(0x40014000, 67644) = 0
> fcntl64(0, F_GETFD) = 0
> fcntl64(1, F_GETFD) = 0
> fcntl64(2, F_GETFD) = 0
> stat64("/proc/bus/pci", {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0
> brk(0) = 0x80bed20
> brk(0x80bfd20) = 0x80bfd20
> brk(0) = 0x80bfd20
> brk(0x80c0000) = 0x80c0000
> open("/etc/vga/libvga.config", O_RDONLY) = 3
> fstat64(3, {st_mode=S_IFREG|0644, st_size=16284, ...}) = 0
> fstat64(3, {st_mode=S_IFREG|0644, st_size=16284, ...}) = 0
> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
> 0) = 0x40
> 014000
> read(3, "# Configuration file for svgalib"..., 12288) = 12288
> read(3, "order to use them:\n# 1280x720, 1"..., 4096) = 3996
> close(3) = 0
> munmap(0x40014000, 4096) = 0
> open("/home/richard/.svgalibrc", O_RDONLY) = -1 ENOENT (No such file or
> director
> y)
> ioperm(0x3b4, 0x2c, 0x1) = -1 EPERM (Operation not
> permitted)
> fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(136, 1), ...}) = 0
> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
> 0) = 0x40
> 014000
> write(1, "svgalib: Cannot get I/O permissi"..., 37svgalib: Cannot get
> I/O permis
> sions.
> ) = 37
> munmap(0x40014000, 4096) = 0
> exit_group(1) = ?
> [richard@xxxxx linrad-01.07]$
>
>
> HTH
>
> Richard
>
> On Thu, 2003-10-16 at 13:11, ik2mmb@xxxxxxxxx wrote:
>
> > This does not answer your fact, just to divulgate and report another crashing system.
> >
> > Cheers,
> >
> > Sergio IK2MMB
> >
> > > Hi
> > >
> > > trying to get linrad to run, albeit with difficulty
> > >
> > > OS Mandrake 9.1, kernel 2.4.21.-25mdk WM =gnome
> > > processor amd 1.2 GHz duron 500MB ram
> > >
> > > installed svgalib-1.4.3mdk and svgalib-devel-1.4.3,
> > > both of the libs are no longer distributed since MDK 8.1.
> > >
> > > compiled linrad eventually and started from the command line
> > > X gets killed
> > > message
> > > /proc/cpuinfo says linuxcore is not compatable
> > > svgalib reports mouse is type 5
> > > I select 800x 600 and font 1
> > >
> > > screen goes totally blank, and monitor is turned off
> > > ctrl + alt +f1 shows active console.
> > >
> > > alt+f7 to return to X just a small block saying 80x40 on the xterm
> > > and a message linrad start on tty8
> > > ctrl + alt f8 agin blank and no drive to the monitor
> > > alt + f12 ( my syslog is echoed here) to see wghat s happened
> > >
> > > not good cant change between consoles, keyboard locked out.
> > > so hit the reset button on the PC, this I dont like doing
> > >
> > > Nothing was recorded in syslog
> > >
> > > I would prefer to run a native linux prog for this.
> > > sitting windows app on either win4lin or vmware really screws up any dsp
> > > function
> > >
> > > 73 mvh
> > > Richard G8JVM
> > > --
> > > Richard Bown <richard.bown@xxxxxxxxxxxxxxxx>
> > >
> > >
--
Richard Bown <richard.bown@xxxxxxxxxxxxxxxx>
LINRADDARNIL