[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linrad] Re: Fwd: [softrock40] Ver 7 28Mhz preamp? Yes
- Subject: [linrad] Re: Fwd: [softrock40] Ver 7 28Mhz preamp? Yes
- From: Giancarlo Moda <yahoo.com; i7swx@xxxxxxxxxxxxxxxx>
- Date: Mon, 1 May 2006 01:24:36 -0700 (PDT)
Hi all,
the preamplifier at 28MHz is required when the VHF-SHF
converter has a low gain and its output is designed
for a higher gain IF like the one used in Linrad HDW
or others.
I would suggest to add the W7AAZ preamplifier using
4xJfet in parallel, as used in the CDG2000 and
Pic-A-STAR. This preamplifier has a very low noise
(expected below 2dB)and another important aspect: The
output impedance changes are no reflected to the input
like for the Norton amplifier. It also has a high IIP3
(>+35dBm).
You may visit: http://www.warc.org.uk/ and look for
the CDG2000 project.
73
Gian
I7SWX
--- w3sz <w3sz@xxxxxxxxxxx> wrote:
> Hi, All,
>
> Just a note for those interested in using the
> SoftRock v7.0 as a backend
> for transverters, forwarded from the Yahoo Softrock
> group.
>
> Unfortunately, he didn't provide details on what his
> system actually was.
> But it is still some information ;)
>
> As always, ymmv.
>
> I hope to start receiving my SoftRocks late this
> week or early next week,
> and then should have some reports for all.
>
> 73,
>
> Roger
> W3SZ
>
> ------- Forwarded message -------
> From: pxxxxxxxxis <bxxxx@xxxxxxx>
> To: softrock40@xxxxxxxxxxxxxxxx
> Subject: [softrock40] Ver 7 28Mhz preamp? Yes
> Date: Sun, 30 Apr 2006 19:07:48 -0400
>
> This morning I was using the Ver7 with my
> 28/144Mhz receive
> converter for a receive IF on 10Ghz rain scatter. I
> tried the system
> WITHOUT the 28Mhz preamp I have been using. I could
> see nothing but a
> few spikes in the 96Khz range. Added the 28Mhz
> preamp again and the
> 9-10db 10Ghz rainscatter signal from W0GHZ was easly
> seen. .... 28Mhz
> preamp REQUIRED for my system!
>
> Yahoo! Groups Links
>
> --
> Roger Rehr
> W3SZ
> http://www.nitehawk.com/w3sz/
>
>
#############################################################
> This message is sent to you because you are
> subscribed to
> the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
> To unsubscribe, E-mail to:
> <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
> To switch to the DIGEST mode, E-mail to
> <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
> To switch to the INDEX mode, E-mail to
> <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
> Send administrative queries to
> <linrad-request@xxxxxxxxxxxxxxxxxxxxx>
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
#############################################################
This message is sent to you because you are subscribed to
the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to <linrad-request@xxxxxxxxxxxxxxxxxxxxx>
LINRADDARNIL