[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[linrad] Re: Its still not playing



Richard,

I suggest that you go to
/etc/vga/libvga.config and near the beginning of the file you will most likely find a line starting with:

Helper /dev/svga

Just below that should be a line containing near its beginning the word

NoHelper

and this is probably commented out with ## so it looks something like

## NoHelper

Uncomment it [remove the ##] and run vgatest again and your error messages

Is svgalib_helper module loaded?

should disappear.

You need to be root to run Linrad anyway, as Leif points out.

73,

Roger
W3SZ

On Mon, 13 Mar 2006 20:35:27 -0500, richard <richard.bown@xxxxxxxxxxxxxxxx> wrote:

Ok untarred svgalib 1.9.24 in /src/so it compiled to pick upth makefile....No

built linrad, loaded svgalib_helper, module in third party section of the kernel,.

lsmod shows its there

[root@xxxxx linrad-01.35]# lsmod
Module                  Size  Used by
svgalib_helper         11716  0
binfmt_misc             8872  1
nfsd                  216544  9
exportfs                4608  1 nfsd


run vgatest
[root@xxxxx linrad-01.35]# ./vgatest
svgalib: Cannot open /dev/svga
Is svgalib_helper module loaded?

See above its there !

[root@xxxxx linrad-01.35]# ./mousetest
svgalib: Cannot open /dev/svga
Is svgalib_helper module loaded?
  YES IT IS

[root@xxxxx linrad-01.35]# ./linrad
svgalib: Cannot open /dev/svga
Is svgalib_helper module loaded?


So back to RPM's

[root@xxxxx linrad-01.35]# lsmod | grep svgalib
svgalib_helper         11716  0
[root@xxxxx linrad-01.35]# urpmi -a libsvga

ftp://anorien.csc.warwick.ac.uk/Mandrakelinux/devel/2006.0/i586/media/contrib/libsvgalib1-devel-1.9.21-1mdk.i586.rpm ftp://anorien.csc.warwick.ac.uk/Mandrakelinux/devel/2006.0/i586/media/contrib/libsvgalib1-1.9.21-1mdk.i586.rpm installing libsvgalib1-1.9.21-1mdk.i586.rpm libsvgalib1-devel-1.9.21-1mdk.i586.rpm from /var/cache/urpmi/rpms Preparing... ############################################# 1/2: libsvgalib1 ############################################# 2/2: libsvgalib1-devel #############################################
[root@xxxxx linrad-01.35]# urpmi -a svgalib

ftp://anorien.csc.warwick.ac.uk/Mandrakelinux/devel/2006.0/i586/media/contrib/svgalib-1.9.21-1mdk.i586.rpm
installing svgalib-1.9.21-1mdk.i586.rpm from /var/cache/urpmi/rpms
Preparing... ############################################# 1/1: svgalib warning: /etc/vga/dvorak-us.keymap created as /etc/vga/dvorak-us.keymap.rpmnew
warning: /etc/vga/libvga.config created as /etc/vga/libvga.config.rpmnew
#############################################
[root@xxxxx linrad-01.35]# cd /usr/src/svgalib-1.9.24/
[root@xxxxx svgalib-1.9.24]# make uninstall
Removing textmode utilities...
Removing shared library stubs (old & current)...
Removing shared library images (old & current)...
Removing static libraries...
Removing header files...
(cd doc; make -f /usr/src/svgalib-1.9.24/doc/Makefile SRCDIR="/usr/src/svgalib-1.9.24" uninstall)
make[1]: Entering directory `/usr/src/svgalib-1.9.24/doc'
Removing all svgalib man pages.
make[1]: Leaving directory `/usr/src/svgalib-1.9.24/doc'
[root@xxxxx svgalib-1.9.24]# cd /home/richard/HamApps/li
linpsk-0.8.1/ linrad-01.35/
[root@xxxxx svgalib-1.9.24]# cd /home/richard/HamApps/linrad-01.35/
[root@xxxxx linrad-01.35]# urpmi -a svgalib
The package(s) are already installed

[root@xxxxx linrad-01.35]# ./vgatest
./vgatest: error while loading shared libraries: libvgagl.so.1: cannot open shared object file: No such file or directory
[root@xxxxx linrad-01.35]# urpmf libvgagl.so.1
libsvgalib1:/usr/lib/libvgagl.so.1
libsvgalib1:/usr/lib/libvgagl.so.1.9.21

So where is linrad looking for its libs, I'd a thought /usr/lib was a normal place ????, arh but it's SuSe time ,why the extra layer of directory !!!!!!

If mknod is run manually linrad starts to run, and it need to be run manually each time the machine is booted as uDev is used with Mandriva 2006, and svgalib_helper needs to be put in modprobe.conf.


There proof that the svga tarball is a real pain in the butt


Cya 73
Richard G8JVM


#############################################################
This message is sent to you because you are subscribed to
  the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx> To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>




--
Roger Rehr
W3SZ
http://www.nitehawk.com/w3sz/

#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>

LINRADDARNIL