[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linrad] Re: Linux distributions
- Subject: [linrad] Re: Linux distributions
- From: richard <blueyonder.co.uk; richard.bown@xxxxxxxxxxxxxxxx>
- Date: Mon, 13 Mar 2006 22:52:06 +0000
leif@xxxxxxxxxx wrote:
Hi Richard,
Well the first thing you get from downloading this tar ball is :-
[root@xxxxx Download]# tar -zxvf svgalib-1.4.3
I guess your system is old-fashioned enough to require
you to type "tar -zxvf svgalib-1.4.3.tar.gz"
tar: svgalib-1.4.3: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
at least 1.9.24 untars !
and compiles
you can compile linrad
and when you run it
[root@xxxxx linrad-01.35]# ./linrad
svgalib: Cannot open /dev/svga
Is svgalib_helper module loaded?
If you type make you get a messake that instructs you to
type "make svgalib". For the added script to become executed
you have to reboot (or execute it manually)
RPM's put things where they are suppose to go, svga-helper is not on the system.
IIRC svga-helper was installed with the RPM
Maybe, burt the RPM did not leave you with a working
svgalib installation.
No the one thing you get with RPM's is a clean removal
Unless your computer is about 5 years old (or more) I suggest you
install 1.9.24 because there is a risk that newer videocards are
not supported by the now very old svgalib-1.4.3
Less than 6 months old.
Also Leif can you clarify which is the latest version of linrad lir035 ??
73
Leif
Richard
#############################################################
This message is sent to you because you are subscribed to
the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to <linrad-request@xxxxxxxxxxxxxxxxxxxxx>
LINRADDARNIL