[linrad] Re: R: [linrad] R: [linrad] Linrad-02.00

["Dennis A. Homerick" <neo.rr.com; DHomerick@xxxxxxxxxxxxxxxx>]

Rein:
    I'm having trouble finding the link too download Linrad 2.0. Can you
help me out please.

Thanks

dennis Homerick

----- Original Message ----- 
From: "Rein A. Smit" <rein0zn@xxxxxxxxxxxxx>
To: "Linrad mailinglist" <linrad@xxxxxxxxxxxxxxxxxxxxx>
Sent: Monday, January 16, 2006 7:43 PM
Subject: [linrad] Re: R: [linrad] R: [linrad] Linrad-02.00


>
>  Hello All,
>
> The following experiences with Linrad 2.0 the Win version so far
>
> Assuming that the linrad file is a stand alone file ( Program )
>
> I tried it on 2 machines:
>
> Pentium 400 MHz, WinSE98 with sound blaster card ( this card will work
> with DSPBlaster under DOS )
> Pentium 2 GHz with Delta44 and AC97 . ( My double boot win/Linux machine )
>
> The first time I loaded linrad
> It asked for the graphics ( used "1",  seems to work fine )
> Next it came up with available sound cards for input
>
> 0 FMTS  = fff  SB16 [220]
> 1  etc a few other devices
>
> I select "0"
>
> Q  Do you need other channels on this card?  A No
>
> "Can not query under Windows"   Is this a statement or an error message?
>
> Q  Sample freq  A = 8000    Q bits?  A = 16
>
> Q select mode  A 1 normal audio   Error message : Stereo Device does not
> accept mono!
> Select 2  ( I/Q ) it does accept this choice.
>
> Q select output device A = "0"  SB 16[220
>
> Linrad appers to be working in I/Q mode -4 Khz to = 4 Khz
>
> Have sound volume control is working and graphics are working
> in mode B  ( normal CW )
>
> It did not accept A ( weak CW  )  error 2004  , no error file present
> could get out of the program with <ESC>
>
> The only keys operating are B ( mode )  U and W
>
>
> After a few excursions I find myself now in a situation that it does not
> seem to accept the selections in "U"
> and the program has stopped working.
>
> The location is in C:/linrad and the param file is there as well
>
> vga mode [0]
> font scale [1]
> mouse speed [0]
> input mode [-1]
> rx channels [0]
> ad channels [0]
> ad speed [0]
> ad device no [0]
> ad device mode [0]
> ad frag [0]
> da device no [0]
> min da speed [0]
> max da speed [0]
> max da channels [0]
> max da bytes [0]
> min da channels [0]
> min da bytes [0]
> da stop/start [0]
> memlock [0]
> check [2220200]
>
> Change only between brackets.
> If file has errors, Linrad will ignore file and prompt
> for a complete set of new parameters
>
> Linrad-02.00
>
> It appears that no parameters are saved at this point!
>
>
> On the other machine I can't get sound cards selected ( either 2 * delta
> or  delta and AC97 )
>
> Also here I get the stereo/mono error messages.
>
> 73 Rein W6/PA0ZN
>
>
>
>
> #############################################################
> This message is sent to you because you are subscribed to
>   the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
> To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
> To switch to the DIGEST mode, E-mail to
<linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
> To switch to the INDEX mode, E-mail to
<linrad-index@xxxxxxxxxxxxxxxxxxxxx>
> Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>
>



#############################################################
This message is sent to you because you are subscribed to
  the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>


LINRADDARNIL