[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linrad] Re: R: [linrad] R: [linrad] Linrad-02.00
- Subject: [linrad] Re: R: [linrad] R: [linrad] Linrad-02.00
- From: "Rein A. Smit" <ix.netcom.com; rein0zn@xxxxxxxxxxxxxxxx>
- Date: Mon, 16 Jan 2006 16:43:52 -0800
Hello All,
The following experiences with Linrad 2.0 the Win version so far
Assuming that the linrad file is a stand alone file ( Program )
I tried it on 2 machines:
Pentium 400 MHz, WinSE98 with sound blaster card ( this card will work
with DSPBlaster under DOS )
Pentium 2 GHz with Delta44 and AC97 . ( My double boot win/Linux machine )
The first time I loaded linrad
It asked for the graphics ( used "1", seems to work fine )
Next it came up with available sound cards for input
0 FMTS = fff SB16 [220]
1 etc a few other devices
I select "0"
Q Do you need other channels on this card? A No
"Can not query under Windows" Is this a statement or an error message?
Q Sample freq A = 8000 Q bits? A = 16
Q select mode A 1 normal audio Error message : Stereo Device does not
accept mono!
Select 2 ( I/Q ) it does accept this choice.
Q select output device A = "0" SB 16[220
Linrad appers to be working in I/Q mode -4 Khz to = 4 Khz
Have sound volume control is working and graphics are working
in mode B ( normal CW )
It did not accept A ( weak CW ) error 2004 , no error file present
could get out of the program with <ESC>
The only keys operating are B ( mode ) U and W
After a few excursions I find myself now in a situation that it does not
seem to accept the selections in "U"
and the program has stopped working.
The location is in C:/linrad and the param file is there as well
vga mode [0]
font scale [1]
mouse speed [0]
input mode [-1]
rx channels [0]
ad channels [0]
ad speed [0]
ad device no [0]
ad device mode [0]
ad frag [0]
da device no [0]
min da speed [0]
max da speed [0]
max da channels [0]
max da bytes [0]
min da channels [0]
min da bytes [0]
da stop/start [0]
memlock [0]
check [2220200]
Change only between brackets.
If file has errors, Linrad will ignore file and prompt
for a complete set of new parameters
Linrad-02.00
It appears that no parameters are saved at this point!
On the other machine I can't get sound cards selected ( either 2 * delta
or delta and AC97 )
Also here I get the stereo/mono error messages.
73 Rein W6/PA0ZN
#############################################################
This message is sent to you because you are subscribed to
the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to <linrad-request@xxxxxxxxxxxxxxxxxxxxx>
LINRADDARNIL