[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[linrad] Linrad-01.35: Easier installation of soundcards with a modified setad.c module.



Hi all,

The set up of soundcards  with  Linrad-01.35 ( option U in the main menu ) can 
be  been made easier if one uses a modified ( more verbose ) version of the 
setad.c module.

Following functionalities have been added in this modified setad.c module:

1. If there is enough space on the screen ( vgamode 12 or 13 required ) , the 
right half of the screen is used to display  information about the current 
status of the sound-driver.  

This allows the user to see the link that has been made by the sound-driver 
between the physical soundboard and the different /dev/dsp* numbers , and 
help him to select the correct device for  Linrad.

It has been designed to work with ALSA and OSS/Linux

2.Additional information is written to the soundboard_init.log file: 
-Information about the status of the current sound-driver and its configured 
soundboards ( same information as in 1)
-Information about the current settings of the first  two  mixers .

This allows a user who can not use  vgamodes 12 or 13 to use the log file to 
find  the same information as in 1.
It also has has the benefit that the soundboard_init.log file now contains 
more information about possible set-up problems and can  be used as a more 
efficient tool for information exchange and assistance between Linrad users.

The modified setad.c  module routine has been developed and tested on a SUSE 
9.2 Linux distro, with Alsa 1.07 and OSS3992.

I will mail this modified setad.c module on request  to any interested Linrad 
user.

Have fun with Linrad :-)

73,

Pierre / ON5GN
 
  

#############################################################
This message is sent to you because you are subscribed to
  the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>

LINRADDARNIL