[linrad] Re: Knoppix sound issue

[<leif@xxxxxxxxxx>]

> but when I
> select the main Linrad screen to view via Weak Signal CW Mode or Normal
> CW Mode the screen paints with a bunch of "Filters not calibrated",
Yes, this is normal. The system IS uncalibrated.



> the
> wide and baseband graphs, mouse cursor (centered) and then nothing. No
> mouse, keyboard, or graphics updates. I must Cntl-C to get back to the
> shell prompt.
>
> Any ideas what might be happening here. I would appreciate any input.
> I'm sooo close...
For some unknown reason your system is probably overloaded.

Delete the par_wcw file so you can get into the parameter setup menu
(Normally you can reach it by pressing "X" on the main menu.)

Deselect second fft, set minimum storage time for fft1 and for the baseband.
(If you did not select the mlocall function your system might be overloaded
by heavy disk swapping)

The problem might also be the mouse type. Does mousetest work properly?

73

Leif / SM5BSZ



#############################################################
This message is sent to you because you are subscribed to
  the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>


LINRADDARNIL