[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[linrad] Re: Forward FFT1



How is the CDROM specified in /etc/fstab?
This file decsribes the filesystems to be mounted at boot - the fourth field in the relevant line has various options - among them is "ro" for readonly and "rw" for read write eg none /mnt/cdrom supermount dev=/dev/hdc,fs=udf:iso9660,ro,--,iocharset=iso8859-1 0 0

for a read only device

Richard

Joe Taylor wrote:

Leif --

No, I am using two RF channels and I/Q data, with 96 kHz sampling and a Delta 44. It works fine this way, using only about 15% of the CPU, but when experimenting with parameters I do not seem to be able to use FFT! versions above #2.


Send me (off list) par_userint and par_wcw (assuming you are in weak cw mode)
I would like to check how it behaves here with your parameters.


Thanks for your replies. I'm stymied at the moment because, believe it or not, I presently have no way to move a file from the Linux/Linrad machine to any other computer. There is no floppy drive. There is a CR-RW drive, and I can read from it, but I haven't figured out how to write to it. (Linux thinks it is Read-Only.) The machine is not connected to the network. None of this is a big deal, but then neither is the problem I asked about -- so it may be some time before I return to it.

I will get back to you in due course -- if I haven't sorted it out by then.
            -- Joe

#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx> To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>



#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>

LINRADDARNIL
s