[linrad] Re: Forward FFT1

[Erik Halsius <erik@xxxxxxxxxxx>]

To burn a cd in linux you need to use mkisofs (for making an iso image
containing the files to be burned) and a program like cdrecord (part of
the cdrtools package) for writing it to disc. They are both command line
tools, there are several GUI frontends available for them such as
xcdroast.

To use a RW-disc as a "dynamic" media you need UFS-support in your
kernel.

//Erik - SA5ADL

On Tue, 2005-08-23 at 19:44 +0800, Richard Hosking wrote:
> Joe
> 
> How is the CDROM specified in /etc/fstab?
> This file decsribes the filesystems to be mounted at boot - the fourth 
> field in the relevant line has various options - among them is "ro" for 
> readonly and "rw" for read write eg 
> 
> none /mnt/cdrom supermount 
> dev=/dev/hdc,fs=udf:iso9660,ro,--,iocharset=iso8859-1 0 0
>  
>  for a read only device
> 
> Richard
> 
> Joe Taylor wrote:
> 
> > Leif --
> >
> >>> No, I am using two RF channels and I/Q data, with 96 kHz sampling 
> >>> and a Delta 44.  It works fine this way, using only about 15% of the 
> >>> CPU, but when experimenting with parameters I do not seem to be able 
> >>> to use FFT! versions above #2.
> >>
> >>
> >> Send me (off list) par_userint and par_wcw (assuming you are in weak 
> >> cw mode)
> >> I would like to check how it behaves here with your parameters.
> >
> >
> > Thanks for your replies.  I'm stymied at the moment because, believe 
> > it or not, I presently have no way to move a file from the 
> > Linux/Linrad machine to any other computer.  There is no floppy 
> > drive.  There is a CR-RW drive, and I can read from it, but I haven't 
> > figured out how to write to it.  (Linux thinks it is Read-Only.)  The 
> > machine is not connected to the network.  None of this is a big deal, 
> > but then neither is the problem I asked about -- so it may be some 
> > time before I return to it.
> >
> > I will get back to you in due course -- if I haven't sorted it out by 
> > then.
> >             -- Joe
> >
> > #############################################################
> > This message is sent to you because you are subscribed to
> >  the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
> > To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
> > To switch to the DIGEST mode, E-mail to 
> > <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
> > To switch to the INDEX mode, E-mail to 
> > <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
> > Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>
> >
> >
> 
> #############################################################
> This message is sent to you because you are subscribed to
>   the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
> To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
> To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
> To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
> Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>
> 


#############################################################
This message is sent to you because you are subscribed to
  the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>


LINRADDARNIL