Re: [linrad] More SuSE 8.2 Help

[KJ7F <kj7f@xxxxxxxxxxxxxxxxx]

Gang,

   I have the sound part working now under alsa with the built in ac97 
sound chip.   I ended up using kmix.   The trick is to mute everything 
except igain, pcm our and line out.   igain sets the input to the board and 
pcm/line out to set the output levels.

   Now if anyone has any ideas as to my display problems.   I tried doing 
a screen capture but it cam out black!   I can run the vga test in the svga 
demo programs and it works fine.   I can't see anything else in 
libvga.config to tinker with.   It sure would be nice to have the screen 
work right under linrad.

Terry  KJ7F

At 09:12 AM 8/3/2003 +0200, you wrote:
> try to experiment first with the programme krecord( it is in suse 8.2). That
> has a recording level indicator and helps you in setting the mixer controls.
> If you are able to record and replay a sound with krecord than linrad should
> work ok.(Switch off krecord before starting linrad)
> I have no knowledge about the screen problems.
> arie
> ----- Original Message -----
> From: Terry <terry@xxxxxxxxxxxxx>
> To: <linrad@xxxxxxxxxxxxxxxxxxxxxx>
> Sent: Sunday, August 03, 2003 3:42 AM
> Subject: [linrad] More SuSE 8.2 Help
>
>
> > Gang,
> >
> >     With Arie's help I have svgalib installed.   The RPM he provided
> worked
> > great.   I had to go in and change some settings in libvga.config but I
> now
> > have the screen working... sort of.   The image is very very dim and there
> > is no color.   I am using an ATI Expert 128 card with a Rage 128 chip and
> a
> > Phillips 150S LCD monitor.   Any ideas any one?   Has any one else even
> > seen this?
> >
> >     I am trying to use the built in AV97 sound since I can't use my old
> old
> > soundblaster card any more.   New motherboards don't have ISA slots any
> > more.   I can hear sound in the headphones but don't see it on the display
> > and changing the settings don't effect the audio levels.   It is obvious
> > that the sound is not going through the linrad processor.   Any ideas on
> > what I'm doing wrong here?
> >
> > Terry  KJ7F
> >
> >




LINRADDARNIL