[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [linrad] svgalib
- Subject: Re: [linrad] svgalib
- From: "John Harrison, NI1B" <jmh6@xxxxxxxxxxxxxx
- Date: Tue, 3 Jun 2003 05:49:41 -0400 (EDT)
Hi all,
Probably a good idea to add 'X' support to linrad at some point :)
A good model of how to do it so both work can be found in the freq51
package. freq51 compiles for X, svgalib(faster), and DOS :)
Linrad works great here!!
warm regards,
john
On Tue, 3 Jun 2003, Matt KB0VUK wrote:
> Svgalib is different from Xwindow (linux GUI). Just because X works
> doesn't mean that linrad (or any program that uses svgalib to display
> graphics) will work. I don't see RealTek 3105 listed as supported by
> svgalib-1.4.3. It seems that svgalib is the factor most limiting linrad
> at this point, I.E. some (many?) people have configuration problems, some
> (much?) hardware isn't supported, but VESA mode usually helps.
>
> 73 Matt KB0VUK
>
> On Monday 02 June 2003 08:48, you wrote:
> > Dr OM Alex,
> > As far as I understand, svgalib deals with a card as it has been
> > installed by linux. So at first you have to run linux with your card. If
> > that goes well, I do not think svgalib is a problem as it allows you to
> > set the video parameters according to what there has been installed.
> > Arie
> >
> > ----- Original Message -----
> > From: Alexander S. Yurkov <fitec@xxxxxxxxxxxx>
> > To: <linrad@xxxxxxxxxxxxxxxxxxxxxx>
> > Sent: Sunday, June 01, 2003 11:38 PM
> > Subject: [linrad] svgalib
> >
> > > Does anybody know is it posible use svgalib-1.4.3 with my old svga
> > > card 'RealTek 3105'. I need it for linrad running but can't
> > > get G640x480x256 mode yet. Seems there is no driver for such a
> > > card...:-(
> > >
> > >
> > > 73 de RA9MB/Alex
>
LINRADDARNIL