Re: [linrad] More stuff.....

[sigurd@xxxxxxxxxxxxxxxx>]

try ps -aux

73.... Sigurd, KJ1K

----- Original Message -----
From: "Conrad G0RUZ" <conrad@xxxxxxxxx>
To: <josh-linrad@xxxxxxxxxxxx>
Cc: "linrad" <linrad@xxxxxxxxxxxxxxxxxxxxx>
Sent: Wednesday, January 08, 2003 5:56 PM
Subject: RE: [linrad] More stuff.....


> Josh I did it and put in the mixer settings as well, thanks it's really
easy
> when you know how!
>
> Now we need someone to decide what needs to be running at boot up to run
> Linrad. I have found out how to disable some things by typing
> chkconfig --level 0123456 <scriptname> off. That switches off the process
> for all run levels, if you want a process to run in Xwindows you would
just
> omit the 5. It would be useful to determine a list of what is not needed
to
> run Linrad. Also I would like to know how to get a list of all running
> processes in text mode. I am beginning to see how clever these operating
> systems really are!
>
> 73
>
> Conrad G0RUZ
>
> -----Original Message-----
> From: owner-linrad@xxxxxxxxxxxxxxxxxxxxx
> [mailto:owner-linrad@xxxxxxxxxxxxxxxxxxxxx]On Behalf Of
> josh-linrad@xxxxxxxxxxxx
> Sent: 08 January 2003 21:36
> To: linrad@xxxxxxxxxxxxxxxxxxxxx
> Cc: linrad
> Subject: Re: [linrad] More stuff and how to call svgalib_helper
>
>
>
> Batch file linrad_start
>
> %<-- %<-- %<--  %<-- %<-- %<--  %<-- %<-- %<--  %<-- %<-- %<--
> #!/bin/bash
>
> insmod
/usr/local/src/svgalib-1.9.17/kernel/svgalib_helper/svgalib_helper.o
>
> ./linrad
> %<-- %<-- %<--  %<-- %<-- %<--  %<-- %<-- %<--  %<-- %<-- %<--
>
> chmod +x linrad_start
>
> ./linrad_start
>
>
>
> I don't know which mixer you are using but most have command based tools
> that you can use as well.  You can just put that in the linrad_start file
> after the insmod, but befor ./linrad
>
> Later, JOSH
>
>
> On Wed, 8 Jan 2003, Conrad G0RUZ wrote:
>
> > I have 3 new installations running with a Rage Mach 64, Rage 128 and
TNT2
> > video cards. All work well and the last 2 pass Leifs demanding 200Hz
> setting
> > with an N=4 window. It is quite amusing with the waterfall average at 1.
> At
> > 400Hz I need a waterfall average of 2 to get glitch free performance.
The
> > AFC graph is very amusing :-) I have used svgalib-1.9.17. There is still
a
> > problem. So that I don't get the message svgalib can' open dev/svga I
have
> > to descend into /usr/local/src/svgalib-1.9.17/kernel/svgalib_helper and
> type
> > insmod svgalib_helper.o.
> >
> > How can I make sure that this happens either everytime that svgalib is
> > called (by Linrad) or when Linux boots. I did it before but I can't
> remember
> > how to make boot-up scripts that will run at automatically. I also need
to
> > know how to ensure only the bare minimum needed processes run at boot
up.
> I
> > ran Linrad on the P4 1.4 Ghz machine for 30 minutes at 4 channels of 32
> bit
> > 96 khz and got 10 overrun errors, Roger w3sz has suggested that the
> > unnessary processes that are running are probably responsible. How does
> > memory affect performance? I only have 256Mb of Rambus memory in the P4
> but
> > I have 1Gb in the Athlon 850. The Athlon 850 does very well indeed and I
> > think it would be more than adequate in practice. The P3 450 is only
just
> > adequate but would be ok with a 48Khz sample rate.
> >
> >
> > Please remind me as I need to make some linux (batch?) files for my
mixer
> > settings as well.
> >
> > I have found the last few days very rewarding in many ways and almost as
> > interesting as working people on eme. I have ordered my WSE RX2500 as a
> > result and I am really looking forward to getting back on, weather and
> time
> > permitting.
> >
> > 73
> >
> > Conrad G0RUZ
> >
> >
> >
>
>
>
>




LINRADDARNIL