[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Two Linrad on one PC under Linux



I want to host two linrad on a Linux PC with an SDR-IQ, as shown in
http://www.sm5bsz.com/linuxdsp/run/network.htm

But it seems that the master one, which receives from SDR-IQ and sends
out packets, occupies /dev/dsp as output. So the slave one which
receives packets from the master one could not use /dev/dsp for
output.

How can I do that on a PC with only one sound card. Can I force the
master linrad to release /dev/dsp since I don't want to listen from
it?

Another question. I want to write a small program which can feed my
data to linrad over ethernet. Is there a special packet format linrad
uses for 16bit raw data (All I know is that they're UDP packets)?

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---

LINRADDARNIL