[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Linrad-02.41 SDR-IQ bug.
- Subject: Linrad-02.41 SDR-IQ bug.
- From: Leif Asbrink <sm5bsz.com; leif@xxxxxxxxxxxxxxxx>
- Date: Sat, 12 Jan 2008 22:02:39 +0100
Hi all,
> There is a bug in Linrad-02.41 that affects only the SDR-IQ.
> The new parameter by which you can select the point where the
> 10 dB attenuator is switched in should be set to its maximum
> value of 25, effectively disabling the 10dB attenuator.
> If you set the attenuation in the Linrad control box
> to a value lower (more negative) than your chosen point,
> the actual attenuation will be 20 dB higher than indicated
> in the Linrad control box.
>
> The error is line 169 in sdr14.c:
> t1=-0.05*(fg.gain-10);
> Should have been:
> t1=-0.05*(fg.gain+10);
>
> This will be corrected in Linrad-02.42.
73
Leif / SM5BSZ
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad-unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad
-~----------~----~----~----~------~----~------~--~---
LINRADDARNIL