[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: SDR-IQ Birdies - the Solution




2009/10/17 VK2KU <
 

  
I removed the paint from the countersunk holes with a hand-held 90-
degree counterbore bit.
Then, lacking any other suitable screws or a more suitable tool,
I spent a happy and fiddly half-hour using a small flat file to remove
the anodizing from
the underside of the 8 screw-heads. I also lightly touched up the
threads to show some metal.

 
 

How about making the lower edge of the top of the box and the lip of the lower part electrically connected instead?

I've not yet taken my SDR-IQ apart, so I don't know if this is feasible, but it seems less fiddly than filing the countersunk part of the screw heads... 

--
--... ...--
Dave (G0DJA)

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---

LINRADDARNIL