[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Linrad] Re: Vista and Windows 7.
- Subject: [Linrad] Re: Vista and Windows 7.
- From: Leif Asbrink <sm5bsz.com; leif@xxxxxxxxxxxxxxxx>
- Date: Wed, 9 Sep 2009 00:09:24 +0200
Hi Alberto,
> could you please elaborate a little on this ? As I told you on another
> group, I am about to
> bring to life a quad core Intel CPU, on a mixed PCI - PCIExpress
> motherboard, and one
> of the op-sys I will install on it, with a multi boot manager, is Windows 7.
>
> So I would like to know which problems you have encountered with Winrad
> and Windows 7.
The problem is with Windows Vista. Presumably it is with Windows 7 as well,
I did not try.
The test is with an audio generator into one channel. I see two carriers
because there is not I and Q with a 90 degree shift. With the WMME
drivers all is OK on the Pentium 4, but with the ASIO driver I see
transcients that indicate disconitnuities in the input stream.
> I did a short test a few weeks ago, when I installed the Release
> Candidate of Windows 7
> on an old Asus laptop, with a Pentium M (Mobile) clocked at 1.4 GHz, and
> Winrad ran
> without error, without using the XP compatibility mode. But I did not
> test the ASIO drivers,
> as they do not exist for the chip set of that old laptop.
>
> I will report my findings on the new PC, when completed, installed and
> running.
I am awaiting your report with great interest:-)
73
Leif
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---
LINRADDARNIL