[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Linrad] Re: RX OVERRUN_ERROR cause: "Visual Effects" (Ubuntu)
- Subject: [Linrad] Re: RX OVERRUN_ERROR cause: "Visual Effects" (Ubuntu)
- From: "Thomas D. Dean" <speakeasy.org; tomdean@xxxxxxxxxxxxxxxx>
- Date: Sun, 31 May 2009 15:35:39 -0700
On Sun, 2009-05-31 at 23:37 +0200, Leif Asbrink wrote:
> Go to System -> Preferences -> Appearance -> Visual Effects
> and select "None."
My system was set to "None" a long time ago. I have been looking into X
smearing and tearing for a while.
I noticed another strange thing,
If I set
CIC2 8
CIC5 6
RCF 4
I get a message "Error the sampling speed is far too high for USB 1.0"
My USB port is 2.0
# lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 008: ID 0403:6001 Future Technology Devices
International, Ltd FT232 USB-Serial (UART) IC
Bus 001 Device 004: ID 0557:2008 ATEN International Co., Ltd UC-232A
Serial Port [pl2303]
Bus 001 Device 003: ID 0557:2008 ATEN International Co., Ltd UC-232A
Serial Port [pl2303]
Bus 001 Device 002: ID 050d:0237 Belkin Components F5U237 USB 2.0 7-Port
Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
The Bus is 001, via Belkin, Device 002 to Bus 001, Device 008: 0403:6001
# sudo lsusb -v -d 0403:6001
Bus 001 Device 008: ID 0403:6001 Future Technology Devices
International, Ltd FT232 USB-Serial (UART) IC
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0403 Future Technology Devices International, Ltd
idProduct 0x6001 FT232 USB-Serial (UART) IC
bcdDevice 6.00
iManufacturer 1 FTDI
iProduct 2 SDR-IQ
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 400mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 SDR-IQ
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Tom
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---
LINRADDARNIL