[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Linrad] Re: Giving up on SDR-IQ and Moving to Sound Card
- Subject: [Linrad] Re: Giving up on SDR-IQ and Moving to Sound Card
- From: Leif Asbrink <sm5bsz.com; leif@xxxxxxxxxxxxxxxx>
- Date: Sat, 11 Apr 2009 12:46:09 +0200
Hi Tom,
> make sdr14 and reboot fixed the access problem...
>
> I can make linrad freeze repeatedly.
>
> S font 3, par port 0, 75%, 75%
> W
> U
> A
> found the SDR - use it
> CIC2 10, CIC5 10, RCF 7 RCF shift 5, clk 0, 35db
> X
> W
> A
> Z = disable output
> DMA 200
> X
> W
> A
> par_wcw missing - accept all defaults
> After it runs for a few seconds,
> X
> and, the display freezes
Hmm, when I try, xlinrad runs fine. For hours.
Do you see "No input" in the lower left corner with a number
that slowly increases?
I did find an error though, when I click a signal Linrad exits
with an arithmetic error. When restarting I am prompted for
new parameters because the output sampling speed is zero and that
is not permitted. After I have given it a value (e.g.11025) I see no
problems. Use U in the main menu to select a soundcard. Then
press Z to ignore it. I will correct this. Thanks for pointing
me to another bug:-)
Maybe you are not running as root? For reasons unknown to me
SDR-14 does not work here when I am logged in as a normal user.
It does run fine with sudo however.
Maybe someone can tell me what to do to make the SDR-14/SDR-IQ
run without root privileges???
(Look at the bottom of Makefile to see how things are done now.)
73
Leif / SM5BSZ
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---
LINRADDARNIL