[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Linrad] Re: Linrad 03.05b Bug
- Subject: [Linrad] Re: Linrad 03.05b Bug
- From: Joe Taylor <Princeton.EDU; joe@xxxxxxxxxxxxxxxx>
- Date: Wed, 08 Apr 2009 19:48:12 -0400
Hi Tom,
Your parameter values hardly look like the defaults.
No doubt you will get a more complete response from Leif. In the
meantime, I will just point out that setting M_CIC2, M_CIC5. and M_RCF
and OL_RCF all to 2 is not a good way to start. try 10, 10, 7, and 6.
-- 73, Joe, K1JT
>> cat par_sdr14
> M_CIC2 [2]
> M_CIC5 [2]
> M_RCF [2]
> OL_RCF [2]
> Sampl. clk adjust [2000]
> Att [0]
> Inp.sel [25]
> Check [2150200]
>
> Change only between brackets.
> If file has errors, Linrad will ignore file and use defaults
> or prompt for a complete set of new parameters
> ==================================================================
>> cat par_userint
> vga mode [12]
> Screen width (%) [75]
> Screen height (%) [75]
> font scale [3]
> mouse speed [8]
> Max DMA rate [20]
> Process priority [0]
> Native ALSA [0]
> Rx input mode [36]
> Rx rf channels [1]
> Rx ad channels [2]
> Rx ad speed [8333583]
> Rx ad device no [10001]
> Rx ad mode [0]
> Rx da mode [1]
> Rx da device no [-2]
> Rx min da speed [1000]
> Rx max da speed [192000]
> Rx max da channels [2]
> Rx max da bytes [2]
> Rx min da channels [1]
> Rx min da bytes [1]
> parport [0]
> parport read pin [0]
> network flag [0]
> Tx ad speed [0]
> Tx da speed [0]
> Tx ad device no [0]
> Tx da device no [-1]
> Tx da channels [0]
> Tx ad channels [0]
> Tx da bytes [0]
> Tx ad bytes [0]
> Tx enable [0]
> Tx pilot tone dB [0]
> Tx pilot microsec. [0]
> check [2220248]
>
> Change only between brackets.
> If file has errors, Linrad will ignore file and use defaults
> or prompt for a complete set of new parameters
>
> >
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---
LINRADDARNIL