[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Linrad] Re: Map65IQ and softrock V9
- Subject: [Linrad] Re: Map65IQ and softrock V9
- From: "KD7HGL (Josh Logan)" <gmail.com; kd7hgl@xxxxxxxxxxxxxxxx>
- Date: Thu, 26 Mar 2009 18:27:29 -0700
I have also been watching the development of this radio and would like
to see it work well with Linrad.
Would it support 2 radios with one si570?
73, KD7HGL
Kleibe wrote:
> I agree with Dom about a dual rx downconverter. I can manage linux/
> linrad but the average hardware is not often heard in the linrad
> reflector. I think something like UHFSDR from W6DHW
> http://wb6dhw.com/Under_Development.html should be a good start point
> or something new.
>
> 73
> Kleibe
> PP2KR
>
> On 26 mar, 03:29, "f6dro" <f6...@xxxxxxxxxx> wrote:
>> Hi Jacques ,
>>
>> in fact , to obtain full adavanrage what we need is a design able to use
>> fully Linrad , I mean V and H simultaneously and being able to get optimum
>> signals any time. WSE RX is perfectly OK , but a bit too expensive for the
>> average ham.We need a " dual channel system for the poor ham"
>>
>> 73
>> Dom
>
> >
>
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---
LINRADDARNIL