[Linrad] MAP65-IQ 4 MHZ Off

[Les <hotmail.com; mp3downloadcentral@xxxxxxxxxxxxxxxx>]

Hi Joe,

Following up on my comment that

I have noticed that the Freq reported in MAP65 is 4 MHZ off. I have
Linrad set to 28.130 and Fadd to 116000.

Joe says" I don't understand what you mean. What reading is 4 MHz off?
"

I am running 2 set ups for testing and switching back and forth.  A
TS-2000 running W6JT  and a Dem 144/28 into the SDR-IQ/MAP65_IQ. Ans
using the MAP65_IQ simply as a bandscope at the time.

On the MAP65_IQ set up, the Freq reported by the Band Map and Message
Windows read 4 MHZ higher the then the read out on the TS-2000 for any
given decoded signal.  Its is also 4 MHZ higher then the Frequency
reported for the caller on the logger.


Did I set up my Fadd wrong?

Joe, thanks agin for a wonderful program!

Les
W2LPL





Date: Sat, Mar 7 2009 8:27 am From: Joe Taylor   Hi Les and all, Les
(W2LPL/W2DBL) wrote: > We are finally up and running. Using a DEM
144/28 converter with the> SDR and Map65-IQ as an EME band scope into
a seperate computer, while> running WJT6 for RX/TX (TS-2000) on
another.> > I have noticed that the Freq reported in MAP65 is 4 MHZ
off. I have> Linrad set to 28.130 and Fadd to 116000. I don't
understand what you mean. What reading is 4 MHz off? > Still running
into issues where linrad freezes and needs to be> rebooted but Im
running on only a P3 1,GHZ with 512 MB. 512 MB may not be enough
memory. MAP65-IQ itself needs about 300 MB. > I have not been able to
decode anything below -22 db, Are there any> other settings to be
played with on Linrad to increase sensitivity or> is it function of my
limited processing power ? MAP65 has no adjustable settings that
affect decoding, other than QSO frequency and Tolerance. These afect
only the decoding that appears in the main text window. -- Joe, K1JT

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---


LINRADDARNIL