[Linrad] Re: Map65-IQ not receiving data from Linrad

[w7ami <cableone.net; w7ami@xxxxxxxxxxxxxxxx>]

Gabriel,

   Good catch.  I added the return after the ip address and it works.
Thanks for pointing that out.

   After I got everything up and running I noticed that after 5 to 10
minutes Linrad would freeze.   Changing the "Output delay margin (ms)
from 1000 to 100 cured this.   Linrad has been running on my PC for 24
hours now with out a glitch.

Terry

On Mar 2, 6:47 pm, "Gabriel - EA6VQ" <ea6v...@xxxxxxxxx> wrote:
> >>One odd thing it that even though I put 127.0.0.1 into par_netsend_ip
> >>Linrad reports the ip address as 127.0.0.1.00???
>
> I had the same problem and I found that apparently linrad requires the line
> in the par_netsend_ip file to be followed by a carriage return.
>
> After adding that CR linrad reports the right address 127.0.0.1 and it not
> longer shows errors sending the data.
>
> However MAP65-IQ is still reporting "No RX data".
>
> Back to make more tests....
>
> 73. Gabriel - EA6VQ
> Web-Site: HTTP://www.vhfdx.net<HTTP://www.vhfdx.net>
> VQLog 3.1 (build 53): HTTP://www.vqlog.com<HTTP://www.vqlog.com>
> Real-Time Propagation maps: HTTP://www.vhfdx.net/spots/map.php
> <HTTP://www.vhfdx.net/spots/map.php>
>
> > -----Mensaje original-----
> > De: linrad@xxxxxxxxxxxxxxxx [mailto:linrad@xxxxxxxxxxxxxxxx]En nombre de
> > w7ami
> > Enviado el: domingo, 01 de marzo de 2009 22:09
> > Para: Linrad
> > Asunto: [Linrad] Map65-IQ not receiving data from Linrad
>
> > Help.   I'm trying to get a new setup of Map65-IQ to work with
> > Linrad.   I have set up Linrad according to the quick start setting on
> > Joe's page.   I added the par_netsend_ip file with 127.0.0.1 as the
> > only text. I set the base report to 50020 and turned off all sends and
> > receives except for item #8 which is ON (port50024).   I hit "T" in
> > the main menu and Linrad reports that it is in the Netsend and SDR-IQ
> > modes.   I installed Map65-IQ ran it and nothing!   It never sees the
> > data from Linrad.   If I try to do anything with Map65-IQ the process
> > will crash and then I get a Net Send error in Linrad.
>
> > The computer is an Asus P5K-E with a dual core Intel processor running
> > Win XP with SP3.   Linrad is up and running and I can see and hear my
> > echos there.  Localhost is running and I can ping it.
>
> > One odd thing it that even though I put 127.0.0.1 into par_netsend_ip
> > Linrad reports the ip address as 127.0.0.1.00???
>
> > I also tried it with Vista64 on the same PC with the same results.
>
> > Terry W7AMI
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---


LINRADDARNIL