Re: Output Delay Margin

[VK2KU <clearmail.com.au; vk2ku@xxxxxxxxxxxxxxxx>]

Hi again Leif,

As I thought, the problem was in Virtual Audio Cable,
which I had configured for a minimum sample rate of 22050 Hz.
I lowered that to 11025 (same as I have for Output Sampling Speed in
Linrad)
and the slight breaks in audio went away.

I also raised the Output Delay Margin to 500ms, noted the lowest D/A
Min,
and then lowered it back to 300ms.
It now drops to 0.093s and stays there, so all is well.
Thanks again for the advice.
Another problem fixed :-)

73  Guy
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad-unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad
-~----------~----~----~----~------~----~------~--~---


LINRADDARNIL