[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linrad] Re: Using the Linrad Network
- Subject: [linrad] Re: Using the Linrad Network
- From: Joe Taylor <Princeton.EDU; joe@xxxxxxxxxxxxxxxx>
- Date: Thu, 14 Jun 2007 13:58:24 -0400
Leif and all,
It turns out that my network speed problem had a simple cause.
The computer running Linrad is connected to the LAN through a
rather old 10 Mbit/s hub/repeater. Therefore it maxes out
around 1.2 MByte/s, too slow for 4 channels at 96 kHz in any of
Linrad's network modes except mode 4.
Looks like I need a new hub, or at least a simple crossover
cable between the two computers.
I will report further, fairly soon I hope, on my effort to
connect Linrad to MAP65.
-- Joe, K1JT
#############################################################
This message is sent to you because you are subscribed to
the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to <linrad-request@xxxxxxxxxxxxxxxxxxxxx>
LINRADDARNIL