[linrad] A/T-graphics; Re: [linrad] Linrad-02.11

['Zaba' OH1ZAA <dlc.fi; zaba@xxxxxxxxxxxxxxxx>]

Leif-san!

Version wlr 2.11 works fine (even in parallel with a
DVB-application; small screen digi-tv on top of Linrad).

The only aberration I see in comparison with former versions
is the switch-over from the lower left corner Delay time info
(T) back to the Amplitude margins (A). At least on a 1280x1024
TFT-screen there is a one graphics line residual from the top
pixels of the A/D and D/A speeds as well as the full but fixed
value of the last speed error indication. Also the amplitude
info operation seems to be crippled (compared to earlier wlr's)
after switching back from T to A through the keyboard.

Hopefully Summer got you by surprise in Sweden as it did over
here in Finland. Maybe a little tour outside will give you some
extra inspiration for the removal of the few remaining bugs.
The number of bugs outside will certainly increase, and these
wlr-bugs will be good company there if you can "kick 'em out"!

                              Cheers/73, "Zaba" OH1ZAA/2



At 03:21 6.5.2006, SM5BSZ wrote:

> Hi All,
>
> The X11 screen update "mystery" is solved. It was
> a stupid mistake of mine and not a problem with
> the X11 server;-)
>
> As it turns out, the SDR-14 device driver for Windows
> does not like writes to happen while reads take place
> which causes problems with frequency and gain control
> with the mouse. For unknown reasons this is not any
> problem with the Linux device driver. Maybe it has
> buffers that can absorb the small messages written(?)
>
> Many thanks to Pierre, ON5GN who found out what the X11
> bug was and to Roger W3SZ for testing the SDR-14 under
> Windows.
>
> Bug reports on 02-11 are very welcome!
>
> 73
>
> Leif


#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>


LINRADDARNIL