[linrad] Re: multiple instances of Linrad

[w3sz <comcast.net; w3sz@xxxxxxxxxxxxxxxx>]

Hi, Stan,

Thanks for the note!  You are right that this is too much fun ;)

The way I have my hardware FT1000 control add-on written at this point  
only one instance of it could be open at a time.  But it would be simple  
to rewrite it so that the serial port was only opened when the data link  
was to be used, and to close it immediately thereafter.  If that were  
done, then I could use multiple instances of XWindows Linrad and still  
retain control of the FT1000 frequency from Linrad.  Then I could forget  
about the separate computer for monitoring and just use one computer /  
monitor with 4 or 5 instances of Linrad running for everything.  I will  
play with changing the code later today at Hilltop.  Because Linrad for  
Windows won't control the FT1000, this all depends on XWindows-Linrad  
being as happy with multiple instances as Linrad for Windows is, and I  
haven't checked that out yet.

Have a great weekend, and

73,

Roger
W3SZ


> Consider the other multichannel M audio PCI cards like the 6-6 or the  
> 1010.

I am not an expert on the mAudio cards, but I believe the 6-6 still only  
gives 4 analog channels of in/out.

The 1010 appears to me to have bandpass filtering of the analog signals so  
that even though it samples at 96K, the spectrum is limited to 22  
Hz-22kHz.  I could be wrong, but that is what the specs suggest to me.




> Stan, W1LE  FN41sr   Cape Cod
>
>
> w3sz wrote:
>
> > Hi, All,
> >
> > The SoftRock v7s are so cheap I am starting to come up with all sorts  
> > of  uses for them in conjunction with Linrad.
>
>
> #############################################################
> This message is sent to you because you are subscribed to
>   the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
> To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
> To switch to the DIGEST mode, E-mail to  
> <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
> To switch to the INDEX mode, E-mail to  
> <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
> Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>



--
Roger Rehr
W3SZ
http://www.nitehawk.com/w3sz/

#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>


LINRADDARNIL