[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [linrad] SSB Parameters
Hello, all,
Here are my SSB parameters:
First FFT bandwidth (Hz) [83]
First FFT window (power of sin) [2]
First forward FFT version [0]
First FFT storage time (s) [1]
First FFT amplitude [1000]
Enable second FFT [1]
First backward FFT version [0]
Sellim maxlevel [6000]
First backward FFT att. N [6]
Second FFT bandwidth factor in powers of 2 [2]
Second FFT window (power of sin) [0]
Second forward FFT version [0]
Second forward FFT att. N [7]
Second FFT storage time (s) [5]
Enable AFC/SPUR/DECODE [1]
AFC lock range Hz [150]
AFC max drift Hz/minute [100]
Enable Morse decoding [0]
Max no of spurs to cancel [100]
Spur timeconstant (0.1sek) [5]
First mixer bandwidth reduction in powers of 2 [4]
First mixer no of channels [1]
Baseband storage time (s) [200]
Output delay margin (0.1sek) [5]
Output sampling speed (Hz) [10000]
Default output mode [1]
Audio expander exponent [3]
A/D speed [96000]
Check [1110107]
Change only between brackets.
If file has errors, Linrad will ignore file and prompt
for a complete set of new parameters
linrad-01.21
-----end of SSB parameters
Here are my wcw parameters:
First FFT bandwidth (Hz) [100]
First FFT window (power of sin) [3]
First forward FFT version [2]
First FFT storage time (s) [20]
First FFT amplitude [1000]
Enable second FFT [1]
First backward FFT version [1]
Sellim maxlevel [6000]
First backward FFT att. N [6]
Second FFT bandwidth factor in powers of 2 [4]
Second FFT window (power of sin) [4]
Second forward FFT version [2]
Second forward FFT att. N [10]
Second FFT storage time (s) [15]
Enable AFC/SPUR/DECODE [1]
AFC lock range Hz [150]
AFC max drift Hz/minute [100]
Enable Morse decoding [0]
Max no of spurs to cancel [100]
Spur timeconstant (0.1sek) [5]
First mixer bandwidth reduction in powers of 2 [4]
First mixer no of channels [1]
Baseband storage time (s) [150]
Output delay margin (0.1sek) [5]
Output sampling speed (Hz) [6000]
Default output mode [1]
Audio expander exponent [3]
A/D speed [96000]
Check [1110107]
Change only between brackets.
If file has errors, Linrad will ignore file and prompt
for a complete set of new parameters
linrad-01.25
With the SSB parameters I get a delay on the order of 0.5-0.7 seconds or
less. I am not sure of the delay with the CW parameters listed above, as
I didn't check it today, but generally I have had delays of 2-5 seconds
[which are not a problem for my purposes].
I post them with no representation as to their optimization. Rather, they
are being posted to provide an object for criticism, and to provide a
framework for the discussion of the tradeoffs and consequences of specific
parameter choices.
These are running on this system:
CPU:: Pentium 3
CPU Speed:: 1 GHz
RAM in MB:: 770 MB
SOUND CARD:: M-Audio Delta44
SOUND DRIVER:: OSS/Linux OSS 3.99.1g
ADDITIONAL CARD1:: SoundBlaster PCI
VIDEO CARD:: ATI Radeon 7000
VIDEO DRIVER:: Rage 128
LINUX DISTRIBUTION:: Red Hat
LINUX VERSION:: 8.0
KERNEL VERSION:: 2.4.20-28.8
GCC VERSION:: 3.2 20020903
SVGALIB VERSION:: 1.9.19
LINRAD VERSION:: 01.25
Hope that is of some interest, and
73
Roger Rehr
W3SZ
--
Roger Rehr
W3SZ
http://www.qsl.net/w3sz
LINRADDARNIL