[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [linrad] WSE converters and parallel port problems
Hi, Jurgen,
I have not seen this behaviour. It might be a reflection of how the
printer port is set up in the bios.
Is it set as standard, or ECP, or EPP?
Could it be a problem with the port address or the interrupt??
I do not know, but am just making suggestions.
Also, you might look for a Linux utility to test the parallel port...I
don't know if one exists.
Good luck.
I am having parallel port control problems with another set of programs
running under Windows, VHFLog and KMRover, and am being driven crazy by
them. I have installed new addon ports, changed from PCI to ISA add on
ports and back again, varied the Address and IRQ, and changed the port
type all with no beneficial effect.
So I know the pain you are feeling :(
I am actually thinking of reiinstalling the O/S and if that doesn't work,
getting another motherboard to try to solve my problem. Irregular printer
port behaviour can be very frustrating.
73,
Roger
W3SZ
On Tue, 7 Dec 2004 22:08:44 +0100, Jurgen van de Glind <pe1lwt@xxxxxxxxx>
wrote:
> pe1lwt@xxxxxxxxx
--
Roger Rehr
W3SZ
http://www.qsl.net/w3sz
LINRADDARNIL