[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linrad] Re: Sometimes you feel like a nut!
I assume that you have already read Leif's pages. If not go there. If
so, GO to
http://www.nitehawk.com/w3sz/start.htm and click on "Word Doc of my 2002
Dubus Linrad article, updated in March 2005' or go to
http://www.nitehawk.com/w3sz/NEWSLinrad-2-2005FINAL.doc .
The color figure http://www.nitehawk.com/w3sz/i3dlifinal.png will help
with the text.
If you don't mind being a bit out of date [things have changed some] you
can read the pdf at:
http://www.nitehawk.com/w3sz/DUBUSLinrad2002.pdf .
There is other stuff accessed from the start page that may help, too.
Let me know how it goes,
73,
Roger
W3SZ
On Sun, 01 May 2005 23:13:02 -0400, Mike(W5UC) & Kathy(K5MWH)
<w5uc@xxxxxxx> wrote:
Dear Friends:
At last, after approximately 5 weeks I finally have a version of Linux
running in a dual boot configuration with Win ME(Knoppix 3.7, HDD
installation), and I can launch Linrad. My goal was to get Linrad
running and learn to use it, then build a dedicated machine for Linrad.
Great right? Well no, not exactly.
What do I do now? How do I turn the noise blanker on? How do I know if
it is running? Will I be able to tell the difference in the sound
output? Is it adjustable, and if so what do I do to adjust it?
Apparently I am far too Windows and GUI oriented, or I don't understand
what Linrad is supposed to do(or both). I am drowning in this stuff,
and just about ready to throw in the towel. Only rarely do I get
something that might look like the baseband scope, and then it doesn't
tell me anything I understand.
Can someone please point me in the right direction, or at least tell me
how to figure out where the right direction is?
Thanks & 73,
Mike, W5UC
#############################################################
This message is sent to you because you are subscribed to
the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to
<linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to
<linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to <linrad-request@xxxxxxxxxxxxxxxxxxxxx>
--
Roger Rehr
W3SZ
http://www.qsl.net/w3sz
#############################################################
This message is sent to you because you are subscribed to
the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to <linrad-request@xxxxxxxxxxxxxxxxxxxxx>
LINRADDARNIL