[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[linrad] Re: Here I go again

Good to see you give it one last go. I hope that you get it up and running this time. Your current problem is likely caused by linux not being able to recognize your sound card. Older ISA cards are not plug and play (in widows either) and must be set up manually. Once you get then running they are easier to configure for linrad though. It will be interesting to see what Roger and Leif come up with to fix this one. 

Terry  W7AMI

Mike(W5UC) & Kathy(K5MWH) wrote:


Ok Gang:

I decided to try once more using W3SZ's  Knoppix 3.8 file.
I finally figured out how to get into Linrad, but now I have sound problems and when I try to get beyond the opening screen I get the following:
modprobe: FATAL error running install command for sound_slot_0 (this is shown a total of 3 times) 
INTERNAL ERROR: 1007 (error=19)
routine: open _audio_input  file:setad.c
Failed to open audio input
Check Sound system!!!
If OSS is used, start sound with the soundon command
maybe set up file '"dsp-uiparm" is incorrect
Use u=A/D and D/A setup in the main menu
1) The sound works, at least in Win ME. ( Daily I thank God for Bill Gates and Windows) 
2)  If I try the u option in the setup screen I get a failure again.
3)  The sound card is a 16 bit ISA Soundblaster.
4) I have a PCI soundcard, but it requires powered speakers, and the set I ordered arrived damaged(Yesterday). Waiting for 
     replacements.

Please, any guidance?

73
Mike, W5UC







#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>
LINRADDARNIL
a