[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[linrad] Removable drive bays

Consider adding a removable hard disk drive bay and dedicate a removable HDD to the application.
Additional drive trays are available for other HDDs. The mobile racks are available in SATA, SCSI, or IDE
~25$ for the mobile rack with tray and another 18$ per additional tray. I use the aluminum trays. 

go to:   http://www.computergate.com

and look for "HDD mobile racks".  The BEANTECH BT32 works for me
Other vendors also have them. I have not tried the "hot swap" software, no interest. 

You will need a 5.25 drive bay.
With the computer OFF, apply the HDD mobile rack tray with HDD to support the desired application. 
enable the keylock switch on the HDD mobile rack and apply power.

Stan, WA1ECF



zzzzz



#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>
LINRADDARNIL
u