RE: [linrad] Linrad Questions

[Kohjin Yamada <jr1ede@xxxxxxxxxxxxxxx>]

Hi Roger good evening,

I woke up a little late this morning and saw good news from both of you!
I will try first download Leif's new one and next yours.
I will give you informed shortly.

Almost two years lovely grand son will visit us this week end so I'll be
busy some, Hi:-)

Also, I have recently finished the evaluation of RedHat 8.0 which ended
up badly I will report this to the reflector.
Maybe some chance with lir00-48?

More later, thanks anyway,

Kohjin - JR1EDE

At 16:15 02/10/11 -0400, you wrote:
>HI, Kohjin!
>
>I have placed the following bzip'd Linrad S files on the web.  These are
>nothing special.  I didn't wait till the bands were hot, or look for
>special signals.  I was working when I got your message, and it was the
>middle of the night here, so I just took 'The Time Machine' to the band
>in question and recorded 30-90 seconds (roughly) of a 90 KHz or so swath
>of the band, at 0030 local time this a.m. while between work duties.  I
>just made sure there were some signals in each file and then uploaded
>them to the web.  The HF band files were obtained by hooking up an R7
>vertical to the input BNC connector of The Time Machine.  The VLF file
>was obtained by hooking up a 108 inch active antenna to the AMRAD VLF
>converter, which was hooked up to the BNC input connector of TTM.
>Output (I/Q) of TTM went directly to Linrad.  Each file starts at an
>even 100 KHz mark on the band in question and goes up 90 KHz from there.
>I have lots of birdies, but there are interesting signals as well.  On
>the VLF file there are 3 or 4 beacons, which appear on Linrad (when run
>at the proper waterfall speed) as pairs of vertical dashed lines around
>a central carrier.  The dashed lines are of course the morse code
>identifiers of the beacons.  All files were made with the appropriate
>plug-in band filter supplied for that band by the folks that make TTM. 
>
>The files are:
>
>http://www.qsl.net/w3sz/vlf1.bz2 6.932 MB      size 300-390 KHz VLF
>Morse Beacons
>
>http://www.qsl.net/w3sz/40m1.bz2 12.611 MB size 40 meter CW band
>
>http://www.qsl.net/w3sz/40m2.bz2 17.936 MB size 40 meter DX phone
>
>http://www.qsl.net/w3sz/20m1.bz2 19.620 MB size 20 meter phone 
>
>I checked the URL's and all of these are available for download.
>
>Let me know your comments, and if you want something else I can try to
>do it.
>
>
>
>73,
>
>Roger Rehr
>W3SZ   FN20ah
>2 Merrymount Road
>Reading, PA  19609-1718
>http://www.qsl.net/w3sz
>
>
>
>
>> -----Original Message-----
>> From: owner-linrad@xxxxxxxxxxxxxxxxxxxxx
>> [mailto:owner-linrad@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Kohjin Yamada
>> Sent: Thursday, October 10, 2002 8:01 PM
>> To: linrad@xxxxxxxxxxxxxxxxxxxxx
>> Subject: RE: [linrad] Linrad Questions
>> 
>> 
>> Hi Roger,
>> 
>> Thanks for your nice input.
>> 
>> At 18:47 02/10/10 -0400, you wrote:
>> >With Leif's help I modified them to decrease 0 frequency
>> noise, and I
>> >also don't use their oscillator due to phase noise;  I use external
>> >oscillator.
>> 
>> If I were, I would do the same.
>> Did you use PTS or xtal osc?
>>   
>> >If you want I can make and send you some gif files of the
>> spectra with
>> >them, or some Linrad S files.  Just tell me what you want
>> (band, mode,
>> >file size, etc) and I can post them to my web site.
>> 
>> I appreciate as huge as possible!
>> Any band or mode but I prefer 144MHz EME of course.
>> 
>> Thanks as always,
>> 
>> Kohjin - JR1EDE
>> 
>> 
>> 




LINRADDARNIL