[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [linrad] xpol question
Hi, Jurgen!
I can tell you from my experience that the lengths do not need to be
identical. Linrad will take care of the difference.
73,
Roger Rehr
W3SZ
http://www.qsl.net/w3sz/start.htm
----- Original Message -----
From: Jurgen van de Glind <Jurgen@xxxxxxxxxxxxxxxxxxx>
Date: Friday, July 11, 2003 4:48 pm
Subject: [linrad] xpol question
>
> This weekend I like to finish my xpol linrad setup for 144MHz EME.
> I have
> some questions left:
> Do I need equal length of coax for H and V running from my preamps
> down to
> the shack ?
> As far as I can remember Linrad can run unequal lenghts. Anyone
> can confirm
> this?
>
> Last week I did some mixer tests with active and passive one. Got
> some nice
> results with the old SL6440 plessey High level mixer, anyone on
> this list
> has tested this device before? seems to me it's still working on
> 144MHzdespite data sheet give a max of 100MHz
>
>
> 73,s Jurgen PE1LWT
>
> 2x 3wl optBV xpol
>
>
LINRADDARNIL